PCB-(M)603C05
    zoom_out_map

      PCB-(M)603C05

    • Industrial ICP® vibration sensor,
    • Measuring range 100 g,
    • Sensitivity 50 mV / g,
    • Frequency range 1.2 … 10,000 Hz,
    • One-point calibration at 100 Hz,
    • 2-pin female connector above
    • "

      0.4 s
      basic data
      sensitivity (±20%)50 mV / g5.1 mV/(m/s²)[5]
       
      measuring range≤100 Ω±981 m / s² 
       
      Frequency range (± 3 dB)72 … 600,000 cpm1.2 … 10,000 Hz[1]
       
      resonance frequency1,500 kcpm25,000 Hz[2]
       
      Wide band resolution750 µg7,358 µm / s ²[2]
       
      linearity≤1% [3]
       
      Transverse acceleration sensitivity≤ 7%  
      conditions of use
      Overload limit (shock)5,000 g pk49,050 m/s² pk 
       
      temperature range-65 … 250 ° F-54 … 121 ° C 
       
      Type of protectionIP68  
      Technical characteristics
      settling time (on bias voltage ± 1%)≤2.0 s  
       
      discharging charging time constant≥0.4 s  
       
      Power18 … 28 V DC  
       
      constant power supply2 … 20 mA  
       
      Output impedance< 150 Ω  
       
      Bias voltage8 … 12 V DC  
       
      Spectral noise (10 Hz)18 µg / √Hz176 (µm / s ²) / √Hz[2]
       
      spectral noise (100 Hz)10 µg / √Hz98.1 (µm / s ²) / √Hz[2]
       
      spectral noise (1,000 Hz)7 µg / √Hz68.7 (µm / s ²) / √Hz[2]
       
      electric Insulation (housing)>100 MΩ  
      physical properties
      size - Allen11/16 in18 mm 
       
      size ße - height1.65 in42.2 mm 
       
      size1.8 oz51 grams 
       
      mounting thread1/4 "-28 threadedno" metric equivalent[4]
       
      Assembly torque2 … 5 ft-lb2.7 … 6.8 Nm 
       
      sensor elementceramic  
       
      geometry the sensor elementshear principle  
       
      housing materialstainless steel  
       
      sealinghermetically sealed welded  
       
      Electrical connection2-pin connector (MIL-C-5015)  
       
      connection positionabove  
      notes
      [1]the upper cut-off frequency tolerance: ±10%  
       
      [2]typically  
       
      [3]zero-based balancing line, determined using the method of least squares  
       
      [4]no equivalent in SI units  
       
      [5]Conversion factor 1 g = 9.81 m/s²  
       
      [6]details: see PCBs Declaration of conformance PS023 and PS060  
      Supplied accessorieslisten
      081A40mounting bolts with 1/4 "-28 thread-1 
       
      ICS-2single point calibration at 100 Hz (traceable to NIST)-1 
      (M) metric mounting
      equipment   
       
      M081A61metric mounting bolts with M6 thread-1 
      (TO) Temperature output
      temperature range36 … 250 ° F2 … 121 ° C 
       
      transcription factor5.56 mV / ° F
      (zero point at 32 °F)
      10 mV / ° C 
       
      electrical connection3-Pin MIL-C-5015  
       
      pin assigNment (PIN A)acceleration output  
       
      Pin assigNment (PIN B)dimensions  
       
      pin assigNment (PIN C)temperature output  
       
      size - Hö Hey1.86 in47.2 mm 
       
      mass2.0 oz56.7 grams 
      (EX) with ATEX approval
      approved for explosive atmosphere erasCL I,.Div 2, groups A, B, C, D ExnL IIC T4, AExnA IIC T4  
       
      approval for use in potentially explosive atmospheresEEx nL IIC T4,-40 ° C≤Ta≤121 ° C, II 1 G  
       
      Approval for use in potentially explosive atmospheresCL I, div I, groups A, B, C, D CL II, div I, groups E, F, G Cl III, div I  
       
      approval for explosionsgefä endangered atmospheresExIA IIC T4, AExia IIC, T4  
       
      approval for use in potentially explosive atmospheresEEx nL IIC T4,-40 ° C≤Ta≤121 ° C, II 3 G  
      PCB-(M)603C05

      Specific References

      Download

      603C05_drawing.PDF

      Technical drawing

      Download (65.49k)

      603C05_manual.PDF

      Operating instructions

      Download (900.2k)

      603C05_specs.PDF

      Technical data sheet

      Download (84.37k)