PCB-(M)601A01
zoom_out_map

PCB-(M)601A01

  • Industrial ICP® vibration sensor,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.27 … 10,000 Hz,
  • One-point calibration at 100 Hz,
  • 2-pin female connector above
  •  

    basic data
    sensitivity (±20%) 10.2 mV/(m/s²) [5]
     
    measuring range ±50 g ±490 m /s²  
     
    Frequency range (± 3 dB) 16 … 600,000 cpm 0.27 … 10,000 Hz [3]
     
    resonance frequency 960 kcpm 16,000 Hz [4]
     
    Wide band resolution 50 µg 491 µm / s ² [4]
     
    linearity ≤1%   [1]
     
    Lateral acceleration sensitivity ≤ 7%    
    Conditions of use
    Overload limit (shock) 5,000 g pk 49,050 m/s² pk  
     
    Temperature range -65 … 250 ° F -54 … 121 ° C  
     
    protection class IP68    
    technical characteristics
    Settling time (on bias voltage ± 1%) ≤4.0 s    
     
    discharging charging time constant ≥0.6 s    
     
    Power 18 … 28 V DC    
     
    constant power supply 2 … 20 mA    
     
    Output impedance < 150 Ω    
     
    Bias voltage 8 … 12 V DC    
     
    Spectral noise (10 Hz) 3.2 µg / √Hz 31,0 (µm / s ²) / √Hz [4]
     
    spectral noise (100 Hz) 1.0 µg / √Hz 9.81 (µm / s ²) / √Hz [4]
     
    Spectral noise (1,000 Hz) 0.7 µg / √Hz 6.94 (µm / s ²) / √Hz [4]
     
    electrical insulation (housing)    
    Physical properties
    size - hex 7/8 in 22 mm  
     
    size - height 1.94 in 49.3 mm  
     
    Weight 2.8 oz 80 g  
     
    mounting thread 1/4 "-28 threaded no equivalent [2]
     
    Assembly torque 2 … 5 ft-lb 2.7 … 6.8 Nm  
     
    sensor element ceramic    
     
    geometry of the Sensor element shear principle    
     
    housing material stainless steel    
     
    sealing hermetically sealed welded    
     
    Electrical connection 2-pin connector (MIL-C-5015)    
     
    connection position above    
    notes
    [1] zero-based balancing line, determined using the method of least squares    
     
    [2] no equivalent in SI units    
     
    [3] the upper cut-off frequency tolerance: ±10%    
     
    [4] typically    
     
    [5] conversion factor = 1 g 9.81 m/s²    
     
    [6] details: see PCBs Declaration of conformance PS023    
    equipment
    081A40 Mounting bolts with 1/4 "-28 thread -1"  
    (M) metric mounting
    equipment      
     
    M081A61 metric mounting bolts with M6 threaded -1  
    (TO) temperature output
    temperature range 36 … 250 2 … 121  
     
    transcription factor 5.56 mV / ° F
    (zero point at 32 °F)
    10 mV / ° C  
     
    Electrical connection 3-Pin    
     
    pin assigNment (PIN A) acceleration output    
     
    Terminal assigNment (PIN B) ground    
     
    pin assigNment (PIN C) temperature output    
    PCB-(M)601A01

    Specific References

    Download

    601A01_drawing.PDF

    Technical drawing

    Download (33.91k)

    601A01_manual.PDF

    Operating instructions

    Download (849.91k)

    601A01_specs.PDF

    Technical data sheet

    Download (56.17k)