PCB-(M)350A13
- ICP® shock acceleration sensor,
- With an electric filter,
- Measuring range 10,000 g,
- Sensitivity 0.5 mV / g,
- Frequency range 0.4 … 7,500 Hz,
- 10-32 female connector above
| basic data | |||
| Sensitivity (± 15%) | 0.5 mV / g | 0.051 mV / (m / s) | |
| measuring range | ± 10,000 g pk | ± 98,000 m / s² pk | |
| Frequency range (± 10%) | 0.4 ... 7500 Hz | ||
| Cut-off frequency of the electric filter (-10%) | ≥7.500 Hz | [2] | |
| resonant frequency | ≥50.000 Hz | ||
| Broadband resolution | 0.06 g RMS | 0.59 m / s RMS | [1] |
| linearity error | ≤1% | ||
| Lateral acceleration sensitivity | ≤5% | ||
| Operating conditions | |||
| Overload limit (shock) | ± 30,000 g pk | ± 294,000 m / s pk | |
| The temperature range (operation) | -65 ... 250 ° F | -54 ... 121 ° C | |
| Temperature range (storage) | -65 ... 250 ° F | -54 ... 121 ° C | |
| Technical characteristics | |||
| supply voltage | 18 ... 30 V DC | ||
| Constant current supply | 2 ... 20 mA | ||
| output impedance | ≤100 Ω | ||
| Bias voltage | 8 ... 12 V DC | ||
| discharging | 0.4 ... 1.4 s | ||
| Settling time (on the bias voltage ± 10%) | &le<5 s | ||
| physical properties | |||
| sensor element | quartz | ||
| Geometry of the sensor element | shear principle | ||
| housing material | stainless steel | ||
| seal | hermetically sealed | ||
| Size - Hexagon | 0.5 in | 12.7 mm | |
| Size - Height | 1.45 in | 36.8 mm | |
| Dimensions | 0.63 oz | 17.9 grams | [1] |
| electrical connection | 10-32 coaxial | ||
| port location | Above | ||
| mounting thread | 1/4 "-28 male thread | ||
| mounting torque | 25 ... 40 in-lb | 280 ... 450 Ncm | |
| Hints | |||
| [1] | typically, | ||
| [2] | first-order low-pass filter | ||
| [3] | Details: see PCB Declaration of Conformance PS023 | ||
| included supply | |||
| ACS-14 | Hopkinson bar calibration for shock sensor | -1 | |
| ACS-22 | Frequency response, traceable to NIST (100 Hz to ± 1 dB point) | -1 | |
| (M) Metric assembly | |||
| mounting thread | M6 x 0.75 male |
PCB-(M)350A13
