PCB-350A43
- Triaxial ICP® shock acceleration sensor,
- Mass-insulated,
- With electric and mechanical filters,
(-3 dB at 25,000 Hz) - Measuring range 10,000 g,
- Sensitivity 0.5 mV / g,
- Frequency range 0.4... 10,000 Hz,
- Integrated cable, length 1.5 m,
ending on 4-pin female connector, - Including extension cable, length 1.5 m,
ending on three BNC plugs
| Specifications | |||
|---|---|---|---|
| Basic data | English units | SI units | |
| Sensitivity (± 30 %) | 0.5 mV / g | 0.05 mV/(m/s²) | |
| Measuring range | ±10.000 gPK | ±98.000 m/s²PK | |
| Frequency range (± 1 dB) | 0.4... 10,000 Hz | ||
| Frequency range (-3 dB) | 0.2... 25,000 Hz | [2] | |
| Resonance frequency | ≥50.000 Hz | ||
| Electrical filter corner frequency (-3 dB) | 21,000 Hz | [3] [1] | |
| Resonance frequency of the mechanical filter | 35,000 Hz | [4] [1] | |
| Wide band resolution (1... 10,000 Hz) | 0.04 gRMS | 0.39 m/s² RMS | [1] |
| Linearity error | ≤2% | ||
| Transverse acceleration sensitivity | ≤7% | ||
| Conditions of use | |||
| Overload limit (shock) | ±50. 000 g pk | ±490. 000 m/s² pk | |
| temperature range (operation) | 0... 150 ° F | 18... 66 ° C | |
| temperature range (storage) | 40...200 °F | 40... 93 ° C | |
| strain sensitivity (footprint) | 0,002 g/µε | 0.02 (m/s²)/µε | [1] |
| specifications | |||
| power supply | 20... 30 V DC | ||
| constant power supply | 2... 20 mA | ||
| output impedance | ≤200Ω | ||
| Bias voltage | 8... 14 V DC | ||
| discharging charging time constant | 1.0... 2.0 s | [1] | |
| settling time (auf Bias-Spannung ±10 %) | < 10 s | ||
| electrical insulation (base) | ≥100 MΩ | ||
| physical Properties | |||
| sensor element | ceramic | ||
| geometry of the sensor element | shear principle | ||
| housing material | titanium | ||
| Sealing | Hermetic | ||
| Size - height | 1.02 in | 26.0 mm | |
| Size - length | 1.02 in | 26.0 mm | |
| Size - width | 1.02 in | 26.0 mm | |
| Weight (without cable) | 2.2 oz | 62.5 grams | [1] |
| Electrical connection | Integrated cable | ||
| Cable outlet | On the side | ||
| Cable termination | 4-pin connector (1/4 "28") | ||
| Cable length | 5.0 ft | 1.52 m | |
| Cable type | Type 034, 4-conductor shielded cable | ||
| Fixing | Through-holes | ||
| Notes | |||
|---|---|---|---|
| [1] | Typically | ||
| [2] | The specified upper limit frequency is a guideline. The frequency response is limited by the combination of electric and mechanical low pass filter. | ||
| [3] | Second-order low-pass filter | ||
| [4] | The amplitude is increased in the resonance frequency by 9 dB. | ||
| [5] | Details: See PCBs Declaration of conformance PS023 | ||
| Included accessories | ||
|---|---|---|
| 034 G 05 | 4-wire shielded cable, length 1.5 m, 4-pin connector to three BNC | (1) |
| 080A197 | Mounting plate for the model 350 B 50 | (1) |
| 100-15136-80 | Mounting screw M6 x 1.0 | (2) |
| 100-8360-70 | Mounting screw 1/4 '28 | (2) |
| 100-8994-40 | Grease | (1) |
| ACS-14T | Hopkinson bar calibration for shock resistance thermometer | (1) |
| ACS-22T | Frequency response for Triaxial accelerometer, traceable to NIST (100 Hz to the upper ±1dB point < / td)> | (1) |
PCB-350A43
