PCB-(M)350B01
    zoom_out_map

      PCB-(M)350B01

    • ICP® shock acceleration sensor,
    • Masseisoliert,
    • With electric and mechanical filter,
    • Measuring range 100,000 g,
    • Sensitivity 0.05 mV / g,
    • Frequency range 4 … 10,000 Hz,
    • Integrated cable, length 3 m,
      ending on 10-32 plug
    • basic data
      sensitivity (±30%)/0.05 mV / g0.005 mV/(m/s²)
      range±100. 000 g pk±981. 000 m/s² PK
      frequency range (± 1 dB)4 … 10,000 Hz
      frequency range (-3 dB)2 … 25,000 Hz[4]
      Corner frequency of the electrical filter (-3 dB)21,000 Hz[2] [1]
      resonance frequency of the mechanical filter35,000 Hz[3] [1]
      Resonance frequency≥ 100,000 Hz
      wide band resolution (1 … 10,000 Hz)rms 4.9 m/s 20.5 g rms[1]
      Linearity error (per 10,000 g / 9≥ 100 MΩs²)≤ 2.5%
      transverse acceleration sensitivity≤ 7%
      conditions of use
      (Shock) overload limit150.000 g pk±1. 471.500 m / pk
      temperature range (operation)0 … 150 ° F-18 … 66 ° C
      Temperature range (storage)-40 …200 °F-40 … 93 ° C
      specifications
      power supply20 … 30 V DC
      Constant power supply2 … 20 mA
      output impedance≤200Ω
      Bias voltage8 … 14 V DC
      Discharging charging time constant0.10 s[1]
      settling time (on area within ±10% of the bias voltage)< 1s
      Electrical insulation (housing)> 1 M Ω
      physical properties
      sensor elementceramic
      Geometry of the sensor elementshear principle
      housing materialtitanium
      sealedsealed close
      size - hex0.375 in9.5 mm
      Size - height1.04 in26.5 mm
      dimensions (without cable)0.20 oz5.5 grams[1]
      electrical connectionIntegrated cable
      cable length10 ft3 m
      cord typetype 031, twisted pair
      Mounting thread1/4 "-28 thread
      Assembly torque25 … 35 in-lb280 … 390 NCM
      notes"
      [1]typically
      [2]second-order low-pass filter
      [3]is the amplitude in the range Resonant frequency increased by 9 dB.
      [4]the specified upper limit frequency is a guideline. The frequency response is limited by the combination of electric and mechanical low pass filter.
      [5]has been tested on a Shaker at 100 Hz
      Accessories
      ACS-22frequency response, traceable to NIST (100 Hz ±1dB point)-1
      PCB-(M)350B01

      Specific References

      Download

      350B01_drawing.PDF

      Technical drawing

      Download (64.57k)

      350B01_manual.PDF

      Operating instructions

      Download (1.7M)

      350B01_specs.PDF

      Technical data sheet

      Download (79.94k)