PCB-106B
- Sub-miniature ICP® pressure sensor with stainless steel diaphragm
- Measuring range 690 kPa
- Sensitivity 7.3 mV / kPa
- Lower limit frequency 0.5 Hz
- Integrated connection cable
specifications | |||
---|---|---|---|
basic data | English units | SI units | |
Measurement range (output range ± 5 V) | 100 psi | 690 kPa | |
Sensitivity (-40 / + 20%) | 50 mV / psi | 7.3 mV / kPa | |
maximum pressure | 7.5 kpsi | 51713 kPa | [2] |
resolution | 0,005 psi | 0.035 kPa | |
resonant frequency | ≥250.000 Hz | ||
Rise time (reflected pressure) | ≤2,0 microseconds | ||
Lower limit frequency (-5%) | 0.5 Hz | ||
linearity error | ≤2,0% FS | [1] | |
Operating conditions | |||
acceleration sensitivity | ≤0,04 psi / g | ≤0,028 kPa / (m / s) | |
The temperature range (operation) | -100 ... 250 ° F | -73 ... 121 ° C | |
Temperature coefficient of sensitivity | ≤0,09% / ° F | ≤0,162% / ° C | |
Maximum temperature shock (for split second) | 3000 ° F | 1649 ° C | |
Maximum shock resistance | 5000 g pk | 49,035 m / s pk | |
Technical characteristics | |||
Output polarity (positive pressure) | positive | ||
Discharging time (at room temperature) | > 1.0 s | ||
supply voltage | 22 ... 30 V DC | ||
Constant current supply | 2 ... 20 mA | ||
output impedance | <100 Ω | ||
Bias voltage | 8 ... 14 V DC | ||
physical properties | |||
Geometry of the sensor element | compression principle | ||
sensor element | quartz | ||
housing material | stainless steel | ||
membrane | 17-4 (stainless steel) | ||
seal | epoxy | ||
electrical connection | Integral Twisted Pair | ||
Electrical connection (red) | Signal / Power | ||
Electrical connection (white) | Dimensions | ||
Mass (wired) | 0.15 oz | 4.3 grams |
[3]
Hints | |||
---|---|---|---|
[1] | Zero-based line of best fit, determined by the method of least squares | ||
[2] | Due to the high sensitivity of the static pressure should be applied very slowly and reduced. | ||
[3] | Details: see PCB Declaration of Conformance PS023 |
included supply | ||
---|---|---|
065A10 | Seal ring, 0.138 "outside x 0.101" x 0.022 inner "high, brass | (3) |
66926-01 | Clamping nut 10-32 x 1/4 "hex | (1) |