PCB-132B38
- Miniature-ICP® pressure sensor
- Measuring range 345 kPa
- Sensitivity 20.3 mV / kPa
- Frequency range 11... 1,000 kHz
- Integrated cable, length 3 m,
ending on open ends
| Specifications | |||
|---|---|---|---|
| Basic data | English units | SI units | |
| Measuring range | 50 psi | 345 kPa | |
| Sensitivity (± 30 %) | 140 mV / psi | 20.3 mV / kPa | |
| Maximum dynamic pressure | 800 psi | 5.516 kPa | |
| Resolution | 0.001 psi | 0,007 kPa | [2] |
| Rise time (incident pressure) | ≤3 µs | [1] | |
| Rise time (reflected pressure) | ≤1 µs | ||
| Lower cut-off frequency (-5%) | 11,000 Hz | ||
| Upper frequency limit | 1 MHz | [3] [2] | |
| Conditions of use | |||
| Temperature range (operation) | -13... 175 ° F | -25... 79 ° C | |
| Technical properties | |||
| Output polarity (positive pressure) | Positive | ||
| Discharge charge time constant (in the case of Kittemperature) | ≤0,000045 s | ||
| Supply voltage | 20... 30 V DC | ||
| Constant power supply | 2... 20 mA | ||
| Output impedance | ≤100Ω | ||
| Bias voltage | 8... 14 V DC | ||
| Physical properties | |||
| Sensor element | Ceramic | ||
| Housing material | Stainless steel | ||
| Sealing | Epoxy resin | ||
| Mass | 0.45 oz | 12.8 gm | [5] |
| Cable termination | Tinned ends | ||
| Cable type | Type 030, coaxial cable | ||
| Notes | |||
|---|---|---|---|
| [1] | Rise time in air at Mach 1 | ||
| [2] | Typically | ||
| [3] | The cut-off frequency can be reduced by the amount of constant current and the length of the cable output used. | ||
| [4] | Calculated | ||
| [5] | Typically; with cable | ||
| [6] | Details: See PCBs Declaration of conformance PS023 | ||
| Included accessories | ||
|---|---|---|
| 070B 09 | Solder adapter | (1) |
PCB-132B38
