PCB-137B27
zoom_out_map

PCB-137B27

  • Measurement Range: 500 psi (3447 kPa)
  • Sensitivity: (±15%) 10 mV/psi (1.45 mV/kPa)
  • Resonant Frequency: >=400 kHz
  • Electrical Connector: 4-Pin
  • Weight: 16.1 oz (456 gm)

PERFORMANCE
Measurement Range (for ±5V output) 500 psi 3447 kPa  
Useful Overrange (for ± 10V output) 1000 psi 6895 kPa [3] 
Sensitivity (±15 %) 10 mV/psi 1.45 mV/kPa [4] 
Maximum Pressure 5000 psi 34474 kPa  
Resolution 1 mpsi 0.007 kPa [2] 
Resonant Frequency ≥400 kHz ≥400 kHz  
Rise Time (Incident) ≤6.5 µ sec ≤6.5 µ sec  
Non-Linearity ≤1.0 % FS ≤1.0 % FS [1] 
ENVIRONMENTAL
Temperature Range (Operating) -100 to +275 °F -73 to +135 °C  
Temperature Coefficient of Sensitivity ≤0.05 %/°F ≤0.090 %/°C  
ELECTRICAL
Discharge Time Constant (at room temp) ≥0.2 sec ≥0.2 sec  
Excitation Voltage 20 to 30 VDC 20 to 30 VDC  
Constant Current Excitation 2 to 20 mA 2 to 20 mA  
Output Impedance ≤100 Ohm ≤100 Ohm  
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC  
PHYSICAL
Sensing Geometry Compression Compression  
Sensing Element Quartz Quartz  
Housing Material Aluminum Aluminum  
Diaphragm Invar Invar  
Sealing Epoxy Epoxy  
Electrical Connector 4-Pin 4-Pin [4] 
Weight 16.1 oz 456 gm [2] 

All specifications are at room temperature unless otherwise specified.


CE
Product Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] For +10 volt output, minimum 26 VDC supply voltage required. Negative 10 volt output may be limited by output bias.
[4] Two identically spec'd elements spaced 10cm apart - see drawing #65310 for details. Individual calibration certs supplied for each channel.
[5] See PCB Declaration of Conformance PS023 for details.
Accessories:
Supplied
PCS-6 Calibration of Series 134, 137, and 138 (2)

Optional Versions:

No optional versions
PCB-137B27

Specific References

Download

137B27_drawing

Download (82.26k)

137B27_manual

Download (903.99k)

137B27_specs

Download (73.87k)