PCB-(M)224C
    zoom_out_map

      PCB-(M)224C

    • ICP® force measuring element,
    • Range 35.6 … 129 kN,
    • Sensitivity 45 mV / kN,
    • Frequency range 0.0003 … 8,000 Hz,
    • 10-32 female connector on the side
    • basic data
      sensitivity (±15%)0.20 mV / lb44,96 mV / kN
      measuring range (pressure)25,000 lb111.2 kN
      Measuring range (traction)8,000 lb35,59 kN
      maximum permissible static load (force)29,000 lb129.00 kN
      Maximum permissible static load (traction)10,000 lb44.48 kN
      wide band resolution0.60 lb RMS2.67 N RMS[1]
      Lower limiting frequency (-5%)0.0003 Hz[2]
      upper frequency limit8,000 Hz[4]
      linearity error≤ 1.5% FS[3]
      conditions
      temperature range-65 … 250 ° F-54 … 121 ° C
      Temperature coefficient of sensitivity≤ 0.03 %/°F≤ 0,054 %/°C
      technical properties
      discharge charge time constant (at room temperature)≥ 2,000 sclose
      electrical connection10-32-coaxial socket
      connection positionside
      Mounting thread5/8-18 female
      notes
      [1]typically
      [2]on the basis of the Calculated discharge charge time constant
      [3]zero-based balancing line, determined using the method of least squares
      [4] Accepted value determined on the basis of solid state Dynamics calculations
      (M) metric mounting
      (S) negative output polarity
      (W) waterproof cable connection
      electrical connectionsealed cable connection
      cable outletSide
      PCB-(M)224C

      Specific References

      Download

      224C_drawing.PDF

      Technical drawing

      Download (49.53k)

      224C_manual.PDF

      Operating instructions

      Download (867.27k)

      224C_specs.PDF

      Technical data sheet

      Download (24.27k)