PCB-3713F112G
- Triaxial MEMS acceleration sensor
- Suitable for measuring static accelerations
- Measuring range ± 2 g pk (± 19.6m / s²)
- Sensitivity (± 3%) 675 mV / g (68.8mV / (m / s²))
- Typical frequency range (± 5%) 0 ... 250 Hz
- Supply voltage 5… 32 V DC
- 9-pin female connector on the side
Specifications | |||
---|---|---|---|
Basic data | English units | SI units | |
Sensitivity (± 3%) | 675 mV/g | 68,8 mV/(m/s²) | [1] |
Measuring range | ±2 g pk | ±19,6 m/s² pk | |
Frequency range (± 5%) | 0 … 250 Hz | ||
Frequenzbereich (±10%) | 0 … 350 Hz | ||
Resonance frequency | 1,2 kHz | [2] | |
Phase error | <2,5 ° | ||
Broadband resolution (0.5 ... 100 Hz) | 0,1 mg rms | 0,001 m/s² rms | [2] |
Linearitätsfehler | ≤1 % | [3] | |
Lateral acceleration sensitivity | ≤3 % | ||
Conditions of use | |||
Overload limit (shock) | ±3.000 g pk | ±29.420 m/s² pk | |
Temperature range (operation) | -65 … 250 °F | -54 … 121 °C | |
Temperature range (storage) | -65 … 250 °F | -54 … 121 °C | |
Temperature coefficient of sensitivity | ±2,5 % | [5] | |
Temperature coefficient of the zero point | ±1,5 % FSO | [5] | |
Stretch sensitivity (base area) | 0.001 g / ml | 0.01 (m / s²) / ε | [2] |
Magnetic sensitivity | 200 µg/Gs | 19,6 (m/s²)/T | [2] |
Technical characteristics | |||
Supply voltage | 5 … 32 VDC | ||
Power consumption | ≤15 mA | ||
Output impedance | ≤120 Ω | ||
Voltage offset | ±20 mVDC | [6] | |
Spectral noise (1 ... 100 Hz) | 10 µg/√Hz | 98.1 (µm / s²) / √Hz | [2] |
Electrical insulation (base) | >100 MΩ | ||
Physical characteristics | |||
Housing material | Titan | ||
seal | Hermetically sealed | ||
Size - length | 0,85 in | 21,6 mm | |
Size - width | 0,85 in | 21,6 mm | |
Size - height | 0,85 in | 21,6 mm | |
Mass | 0,8 oz | 22.7 grams | |
Electrical connection | 9-Pin | ||
connection | Laterally | ||
Mounting thread | 10-32 female |
Hints | |||
---|---|---|---|
[1] | Measured at 100 Hz | ||
[2] | Typically | ||
[3] | Zero-based best-fit line, determined using the least squares method | ||
[4] | Guaranteed; evidenced by the calibration certificate supplied | ||
[5] | -54… 121 ° C, reference 24 ° C | ||
[6] | Offset with 3 meter cable length (type 037) | ||
[7] | Details: siehe PCB Declaration of Conformance PS027 |
included supply | ||
---|---|---|
080A12 | Adhesive fastening | (1) |
081B05 | Mounting stud, 10-32 to 10-32 | (1) |
M081B05 | Mounting bolts, 10-32 on M6 x 0.75 | (1) |
ACS-85T | (1) |