PCB-EX(M)602D01
zoom_out_map

PCB-EX(M)602D01

  • Industrial ICP® vibration sensor,
  • With ATEX / CSA approval,
  • With through hole,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.5 … 8,000 Hz,
  • One-point calibration at 100 Hz,
  • 2-pin female connector on the side
  • "
    basic data
    sensitivity (±10%) 100 mV/g 10.2 mV/(m/s²) [5]
    measuring range ±50 g ±490 m / s²
    Frequency range (± 3 dB) 30 … 480,000 cpm 0.5 … 8,000 Hz [2]
    resonance frequency 1,500 kcpm 25,000 Hz [1]
    Wide band resolution 350 µg 3.434 µm / s ² [1]
    linearity ≤1% [3]
    Transverse acceleration sensitivity ≤ 7%
    conditions of use
    Overload limit (shock) 5,000 g pk 49,050 m/s² pk
    temperature range -65 … 250 ° F -54 … 121 ° C
    Type of protection IP68
    Approval for use in potentially explosive atmospheres ExIA IIC T4, AExia IIC, T4
    approved for explosive atmosphere eras EExnL IIC T4,-40 ° C ≤ Ta ≤ 121 ° C, II 3 G
    approval for use in potentially explosive atmospheres EEx nL IIC T4,-40 ° C ≤ Ta ≤ 121 ° C, II 1 G
    Approval for use in potentially explosive atmospheres CL I, div I, groups A, B, C, D CL
    II, div I, groups E, F, G Cl
    III, div I
    approval for explosionsgefä endangered atmospheres CL I, div 2, groups A, B, C, D
    ExnL IIC T4, AExnA IIC T4
    technical
    settling time (on bias voltage ± 1%) ≤ 2.0 s
    Discharging charging time constant ≥ 0.3 s
    power 18 … 28 V DC
    Constant power supply 2 … 20 mA
    output impedance < 150 Ω
    Bias voltage 8 … 12 V DC
    spectral noise (10 Hz) 8.0 µg / √ Hz 78.5 (µm / s ²) / √ Hz [1]
    Spectral noise (100 Hz) 5 µg / √ Hz 49,1 (µm / s ²) / √ Hz [1]
    spectral noise (1,000 Hz) 4 µg / √ Hz 39.2 ( µm / s ²) / √ Hz [1]
    electrical insulation (housing) ≥ 100 MΩ
    physical properties
    size - L length 1.65 in 41.9 mm
    size - width 0.74 at 18.8 mm
    size - height 0,845 in 21.5 mm
    Mass 2.61 oz 74.0 grams
    mounting thread 1/4"-28 No metric equivalent [4]
    Assembly torque 2 … 5 ft-lb 2.7 … 6.8 Nm
    Sensor element ceramic
    geometry of the sensor element shear principle
    housing material Stainless steel
    sealing hermetically sealed welded
    Electrical connection 2-pin connector (MIL-C-5015)
    Connection position side
    notes
    [1] typically
    [2] The upper cut-off frequency tolerance: ±10%
    [3] zero-based balancing line, determined using the method of least squares
    [4] mounting with M6 screw possible
    [5] conversion factor 1 g = 9.81 m/s²
    [6] details: see PCBs Declaration of conformance PS023 and < a href = ""... "/ produkte_skript/downloads/ce/ps060.pdf" "class ="blue"> PS060
    equipment
    081A97 passage screw 1/4" 28 -1
    (M ) Metric mounting
    equipment
    M081A97 metric mounting bolt with M6 thread -1
    PCB-EX(M)602D01

    Specific References

    Download

    EX602D01_manual.PDF

    Operating instructions

    Download (5.68M)