PCB-(M)641B00
zoom_out_map

PCB-(M)641B00

  • Vibration transmitter with power output according to
    the RMS value of vibration speed,
  • measuring range 0 … 12.7 mm / s RMS,
  • output range 4 … 20 mA,
  • frequency range 10 … 1,000 Hz,
  • 2 Pin socket top
  • ""
    basic data
    range 0,0 … 0.5 in / s RMS 0.0 … 12.7 mm / s RMS [1]"
    Output area 4 … 20 mA
    frequency range (± 10%) 600 … 60,000 cpm 10 … 1,000 Hz [2] [3]
    Wide band resolution 0.005 in / s RMS 0.13 mm / s RMS [4]
    Linearity error ≤1%
    conditions of use
    temperature range -40 … 185 ° F -40 … 85 ° C
    technical Properties
    supply voltage 12 … 30 V DC
    settling time (on final value ±2%) < <5 s
    Electrical insulation (housing) ≥ 100 MΩ
    physical properties
    size - hex 1.0 in 25.4 mm
    Size - height 2.6 in 66 mm
    weight 4.7 oz 131 grams
    mounting thread 1/4 "-28 UNF No metric equivalent
    Assembly torque 3 … 5 ft-lb 4 … 7 Nm
    sensor element ceramic
    Geometry of the sensor element shear principle
    housing material stainless steel
    sealing Hermetically sealed welded
    Electrical connection 2-pin connector (MIL-C-5015)
    connection position above
    Terminal assigNment (PIN A) Output signal 4 … 20 mA positive
    Pin assigNment (PIN B) output signal 4 … 20mA negative
    notes
    [1] conversion factor 1 in / sec = 0.0254 m/s.
    [2] at frequencies below 5 Hz, the output signal fluctuates.
    [3] 1 Hz 60 = cpm ("Cycles Per Minute": revolutions per minute)
    [4] typically
    [5] details: see PCBs Declaration of conformance PS039 and PS053
    Accessories
    081A40 mounting bolts with 1/4 "-28 thread -1
    ICS-4 frequency response calibration of 0 Hz up to the upper 10% frequency -1
    (M) metric mounting
    equipment
    M081A61 metric mounting bolts with M6 thread -1
    (EX) with ATEX approval
    Approval for use in potentially explosive atmospheres DIV II, CL I, GRPS A-D, ExnL, AExnA, IIC T4
    Approval for use in potentially explosive atmospheres EEx ia IIC T4,-40 ° C ≤ Ta ≤ 80 ° C, II 1 G
    approved for explosive atmosphere eras EEx nL IIC T4,-40 ° C ≤ Ta ≤ 80 ° C, II 3 G
    Approval for use in potentially explosive atmospheres DIV I, CL I, II, III, GRPS A-G, ExIA, AExia, IIC T4
    (RV) raw signal output≥ 100 MΩ/g (±20%)
    Electrical connection 3-pin connector (MIL-C-5015)
    pin assigNment (PIN A) output signal 4 … 20 mA positive
    Pin assigNment (PIN B) output signal 4 … 20mA negative
    pin assigNment (PIN C) raw signal positive
    PCB-(M)641B00

    Specific References

    Download

    641B00_drawing.PDF

    Technical drawing

    Download (190.57k)

    641B00_manual.PDF

    Operating instructions

    Download (876.07k)

    641B00_specs.PDF

    Technical data sheet

    Download (72.19k)