PCB-(M)640B01
"""
| basic data | |||
| range | 0,0 … 1 in / s pk | 0.0 … 25.4 mm / s pk | [1] |
| Output area | 4 … 20 mA | ||
| frequency range (± 10%) | 180 … 60,000 cpm | 3 … 1,000 Hz | [2] [3] |
| Wide band resolution | 0.005 in / s pk | 0.13 mm / s pk | [4] |
| linearity error | ≤1% | ||
| conditions of use | |||
| temperature range | -40 … 185 ° F | -40 … 85 ° C | |
| technical characteristics | |||
| Supply voltage | 12 … 30 V DC | ||
| settling time (area within ±2% of full scale) | <15 s | ||
| electrical insulation (housing) | >100 MΩ | ||
| physical properties | |||
| size - hex | 1.0 in | 25.4 mm | |
| Size - height | 2.6 in | 66 mm | |
| weight | 4.7 oz | 131 grams | |
| mounting thread | 1/4 "-28 UNF | No metric equivalent | |
| Assembly torque | 3 … 5 ft-lb | 4 … 7 Nm | |
| sensor element | ceramic | ||
| geometry the sensor element | shear principle | ||
| housing material | stainless steel | ||
| sealing | hermetically sealed welded | ||
| Electrical connection | 2-pin connector (MIL-C-5015) | ||
| connection position | above | ||
| Terminal assigNment (PIN A) | Output signal 4 … 20 mA positive | ||
| Pin assigNment (PIN B) | output signal 4 … 20mA negative | ||
| notes | |||
| [1] | conversion factor 1 in / sec = 0.0254 m/sec. | ||
| [2] | at frequencies below 5 Hz, the output signal fluctuates. | ||
| [3] | 1 Hz 60 = cpm ("Cycles Per Minute": rpm). | ||
| [4] | typically | ||
| [5] | details: see PCB Declaration of Conformance PS039 and PS053 | ||
| equipment | |||
| 081A40 | mounting bolts with 1/4 "-28 thread" | -1 | |
| ICS-4 | frequency response cpm for uniaxial sensors from 0 (0 Hz) up to the upper 10% frequency of vibration transmitter | -1 | |
| (M) metric mounting | |||
| Equipment | |||
| M081A61 | metric mounting bolts with M6 thread | -1 | |
| (EX) with ATEX approval | |||
| Approved for use in potentially explosive atmospheres | DIV II, CL I, GRPS A-D, ExnL, AExnA, IIC T4 | ||
| Approval for use in potentially explosive atmospheres | EEx ia IIC T4,-40 ° C ≤ Ta ≤ 80 ° C, II 1 G | ||
| approval for potentially explosive atmospheres | EExnL IIC T4,-40 ° C ≤ Ta ≤ 80 ° C, II 3 G | ||
| approval for use in potentially explosive atmospheres | DIV I, CL I, II, III, GRPS A-G, ExIA, AExia, IIC T4 | ||
| (RV) Raw signal output - 100 mV/g (±20%) | |||
| electrical connection | 3-Pin MIL-C-5015 | ||
| pin assigNment (PIN A) | output signal 4 … 20 mA positive | ||
| Pin assigNment (PIN B) | output signal 4 … 20mA negative | ||
| pin assigNment (PIN C) | raw signal positive | ||
| (RVVO) raw signal output ? 100 M?/(in/sec) (±20%) | |||
| Electrical connection | 3-Pin MIL-C-5015 | ||
| Pin assigNment (PIN A) | output signal 4 … 20 mA positive | ||
| pin assigNment (PIN B) | output signal 4 … 20mA negative | ||
| Pin assigNment (PIN C) | vibration velocity raw signal positive |
PCB-(M)640B01
