PCB-(M)354B05
- Triaxial ICP® vibration sensor,
- With drill through, li >
- Mass-insulated, li >
- Measurement range 50 g, li >
- Sensitivity 100 mV/g, li >
- Frequency range 0.4... 5,000 Hz,
- 4-pin female connector on the side
| Specifications | |||
|---|---|---|---|
| Basic data | English units | SI units | |
| Sensitivity (≤5 %) | 10.2 mV/(m/s²) | ||
| Measuring range | ±50 g pk | ±491 m/s² pk | |
| Frequency range (≤5 %) | 0.4... 5,000 Hz | ||
| Resonance frequency | ≥25. 000 Hz | ||
| Wide band resolution (1... 10,000 Hz) | 0.0003 g rms | 0.003 m/s² rms | [1] |
| Linearity error | ≤1 % | [3] | |
| Transverse acceleration sensitivity | ≤5 % | ||
| TEDS memory chip (according to IEEE P1451. 4) | Yes | [2] | |
| Conditions of use | |||
| Overload limit (shock) | ±5.000 g pk | ±49.050 m/s² pk | |
| Temperature range (operation) | -65 … 200 °F | -54... 93 ° C | |
| Strain sensitivity (footprint) | 0.003 g/µε | 0.03 (m/s²)/µε | [1] |
| supply | 24... 30 V DC | ||
| constant power supply | 2... 20 mA | ||
| output impedance | 100 Ω | ||
| Bias voltage | 8... 12 V DC | ||
| discharging charging time constant | 1... 2s | ||
| settling time (on area within ±10% of the bias voltage) | < 3s | ||
| spectral noise (1 Hz) | 55 µg/√Hz | 540 (µm/s²)/√Hz | [1] |
| Spectral noise (10 Hz) | 15 µg/√Hz | 147 (µm/s²)/√Hz | [1] |
| spectral noise (100 Hz) | 6 µg/√Hz | 59 (µm/s²)/√Hz | [1] |
| spectral noise (1,000 Hz) | 3 µg/√Hz | 29 (µm/s²)/√Hz | [1] |
| spectral noise (10,000 Hz) | 2 µg/√Hz | 20 (µm/s²)/√Hz | [1] |
| electrical insulation (housing) | ≥100 MΩ | ||
| Physical properties | |||
| sensor element | ceramic | ||
| geometry of the sensor element | shear principle | ||
| Sealing | Hermetic | ||
| Size - height | 0.38 in | 9.7 mm | |
| Size - length | 0.82 in | 20.7 mm | |
| Size - width | 0.82 in | 20.7 mm | |
| Mass | 0.51 oz | 14.5 grams | [1] |
| Electrical connection | 1/4 "-28 4-pin | ||
| Connecting position | On the side | ||
| Mounting screw | 6-32 | ||
| Notes | |||
|---|---|---|---|
| [1] | Typically | ||
| [2] | TEDS memory in accordance with IEEE P1451. 4 | ||
| [3] | Zero-balance just, determined using the method of least squares | ||
| [4] | Details: see PCB Declaration of conformance PS023 | ||
| Included accessories | ||
|---|---|---|
| 081A105 | Mounting screw (6-32 x 1/2 ") | (1) |
| ACS-1T | Frequency response for Triaxial accelerometer, traceable to NIST, 10 Hz up to the upper 5%-Frequenz | (1) |
PCB-(M)354A05
