PCB-(M)260A11

PCB-(M)260A11

  • Triaxial force sensor with charge output,
  • Measuring range (Z axis) 4.45 kN,
  • Measuring range (X - and Y-axes) 2.22 kN,
  • Sensitivity (Z-axis) 3.4 pC/N,.
  • Sensitivity (X - and Y-axes) 7.2 pC/N,.
  • Upper frequency limit 90,000 Hz,.
  • Three 10-32 connectors on the side
  •  

    basic data
    sensitivity (Z axis) (±15%)15 pC/lb3.37 pC/N[1]
     
    sensitivity (X - and Y-axes) (±15%)32 pC/lb7.19 pC/N[1]
     
    measuring range (Z axis)1,000 lb4.45 kN 
     
    measuring range (X - and Y-axes)500 lb2.22 kN 
     
    Maximum power (Z axis)1,320 lb5.87 kN 
     
    Maximum force (X - and Y-axes)660 lb2,94 kN 
     
    maximum moment (Z-axis)14 ft-lb18.98 Nm 
     
    maximum Moment (X - and Y-axes)13 ft-lb17,63 Nm 
     
    upper cut-off frequency90,000 Hz  
     
    linearity≤ 1% FS [2]
     
    Crosstalk (between X - and Y-axis)±3%  
     
    crosstalk (between X and y axis and Z axis)≤5%  
    Conditions of use
    Temperature range-100 … 350 ° F-73 … 177 ° C 
    Technical characteristics
    capacity (all axes)18 pF [3]
     
    insulation resistance (all axes)≥1,000,000 MΩ  
     
    Output polarity (towards the marks)negative  
    physical properties
    preload? 5,000 lb? 22.25 kN[4]
     
    Stiffness (Z axis)10 lb/µin1.75 kN/µm[3]
     
    rigidity (X - and Y-axes)4 lb/µin0.7 kN/µm[3]
     
    Size - height0,390 in9.90 mm 
     
    size - length0,950 in24.1 mm 
     
    size -. Wide0,950 in24.1 mm 
     
    size - inner diameter0,319 in8.10 mm 
     
    size - diameter of the Messoberflä Che0,680 in17,27 mm 
     
    ground0,868 oz24,59 grams 
     
    housing materialstainless steel  
     
    Sealedsealedclose  
     
    electrical connectionthree 10-32 coaxial jacks  
     
    connection positionside  
    Notes
    [1]when using the recommended preload. The sensitivities can depending on the preload to ±5% change.  
     
    [2]zero-based balancing line, determined using the method of least squares  
     
    [3]typically  
     
    [4]should be at least ten times of the operating range used on the X - and Y-axes preload.  
    Equipment
    081A70mounting bolts-1 
     
    082 B 02washer-1 
     
    083A10mounting sleeve-1 
    (W) waterproof cable
    cable exitside  
    (M) metric mounting
    Accessories   
     
    M081A70mounting bolts-1 

    9 other articles of the same category: