PCB-(M)260A11
zoom_out_map

PCB-(M)260A11

  • Triaxial force sensor with charge output,
  • Measuring range (Z axis) 4.45 kN,
  • Measuring range (X - and Y-axes) 2.22 kN,
  • Sensitivity (Z-axis) 3.4 pC/N,.
  • Sensitivity (X - and Y-axes) 7.2 pC/N,.
  • Upper frequency limit 90,000 Hz,.
  • Three 10-32 connectors on the side
  •  

    basic data
    sensitivity (Z axis) (±15%) 15 pC/lb 3.37 pC/N [1]
     
    sensitivity (X - and Y-axes) (±15%) 32 pC/lb 7.19 pC/N [1]
     
    measuring range (Z axis) 1,000 lb 4.45 kN  
     
    measuring range (X - and Y-axes) 500 lb 2.22 kN  
     
    Maximum power (Z axis) 1,320 lb 5.87 kN  
     
    Maximum force (X - and Y-axes) 660 lb 2,94 kN  
     
    maximum moment (Z-axis) 14 ft-lb 18.98 Nm  
     
    maximum Moment (X - and Y-axes) 13 ft-lb 17,63 Nm  
     
    upper cut-off frequency 90,000 Hz    
     
    linearity ≤ 1% FS   [2]
     
    Crosstalk (between X - and Y-axis) ±3%    
     
    crosstalk (between X and y axis and Z axis) ≤5%    
    Conditions of use
    Temperature range -100 … 350 ° F -73 … 177 ° C  
    Technical characteristics
    capacity (all axes) 18 pF   [3]
     
    insulation resistance (all axes) ≥1,000,000 MΩ    
     
    Output polarity (towards the marks) negative    
    physical properties
    preload ? 5,000 lb ? 22.25 kN [4]
     
    Stiffness (Z axis) 10 lb/µin 1.75 kN/µm [3]
     
    rigidity (X - and Y-axes) 4 lb/µin 0.7 kN/µm [3]
     
    Size - height 0,390 in 9.90 mm  
     
    size - length 0,950 in 24.1 mm  
     
    size -. Wide 0,950 in 24.1 mm  
     
    size - inner diameter 0,319 in 8.10 mm  
     
    size - diameter of the Messoberflä Che 0,680 in 17,27 mm  
     
    ground 0,868 oz 24,59 grams  
     
    housing material stainless steel    
     
    Sealed sealedclose    
     
    electrical connection three 10-32 coaxial jacks    
     
    connection position side    
    Notes
    [1] when using the recommended preload. The sensitivities can depending on the preload to ±5% change.    
     
    [2] zero-based balancing line, determined using the method of least squares    
     
    [3] typically    
     
    [4] should be at least ten times of the operating range used on the X - and Y-axes preload.    
    Equipment
    081A70 mounting bolts -1  
     
    082 B 02 washer -1  
     
    083A10 mounting sleeve -1  
    (W) waterproof cable
    cable exit side    
    (M) metric mounting
    Accessories      
     
    M081A70 mounting bolts -1  
    PCB-(M)260A11

    Specific References

    Download

    260A11_drawing.PDF

    Technical drawing

    Download (333.85k)

    260A11_manual.PDF

    Operating instructions

    Download (2.06M)

    260A11_specs.PDF

    Technical data sheet

    Download (149.6k)