PCB-HT(M)622A01
| basic data | |||
| sensitivity (±5%) | 100 mV/g | 10.2 mV/(m/s²) | [1] |
| measuring range | ±50 g | ±490 m / s² | |
| Frequency range (±5%) | 35 … 240,000 cpm | 0.58 … 4,000 Hz | [7] [8] |
| frequency range (± 10%) | 25 … 300,000 cpm | 0.42 … 5,000 Hz | |
| frequency range (± 3 dB) | 12 … 480,000 cpm | 0.2 … 8,000 Hz | |
| resonance frequency | 1.200 kcpm | 20,000 Hz | [2] |
| wide band resolution | 150 µg | 1.472 µm / s ² | [2] |
| linearity | ≤1% | [3] | |
| Transverse acceleration sensitivity | ≤ 5% | ||
| conditions of use | |||
| Overload limit (shock) | 5,000 g PK | 49,050 m/s² pk | |
| Temperature range | -65 … 325 ° F | -54 … 163 ° C | |
| technical | |||
| settling time(on bias voltage ± 1%) | ≤<5 s | ||
| Discharging charging time constant | ≥ 0.8 s | ||
| power | 18 … 28 V DC | ||
| Constant power supply | 2 … 10 mA | [4] | |
| output impedance | < 700 Ω | ||
| Bias voltage (at 4 mA) | 8 … 15 V DC | [5] | |
| spectral noise (10 Hz) | 12 µg / √ Hz | 118 (µm / s ²) / √ Hz | [2] |
| spectral noise (100 Hz) | 3.2 µg /. √ Hz | 31.4 (µm / s ²) / √ Hz | [2] |
| spectral noise (1,000 Hz) | 1.2 µg / √ Hz | 11.8 (µm / s ²) / √ Hz | [2] |
| Electrical protection | RFI/ESD | ||
| Electrical insulation | ≥ 100 MΩ | ||
| physical properties | |||
| size - hex | 7/8 in | 22.2 mm | |
| Size - height | 2.0 in | 50.8 mm | |
| mass | 3.3 oz | 93 grams | |
| mounting thread | 1/4 "-28 UNF | no equivalent | [6] |
| Assembly torque | 2 … 5 ft-lb | 2.7 … 6.8 Nm | |
| sensor element | ceramic | ||
| geometry of the Sensor element | shear principle | ||
| housing material | stainless steel | ||
| sealing | hermetically sealed welded | ||
| Electrical connector | ,MIL-C-5015 | ||
| connection position | above | ||
| notes | |||
| [1] | Conversion factor 1 g = 9.81 m/s² | ||
| [2] | typically | ||
| [3] | zero-based balancing line, determined using the method of least squares | ||
| [4] | maximum 4 mA recommended at temperatures above 121 ° C | ||
| [5] | at larger constant current, the bias voltage increases. | ||
| [6] | noEquivalent in SI units | ||
| [7] | 1 Hz 60 = cpm ("Cycles Per Minute": rpm). | ||
| [8] | the upper cut-off frequency tolerance: ±10% | ||
| [9] | details: see PCBs Declaration of conformance PS023 | ||
| Accessories | |||
| 081A40 | mounting bolts with 1/4 "-28 thread | -1 | |
| ICS-1 | frequency response for uniaxial sensors from 10 Hz up to" to the upper 5% frequency | -1 | |
| (M) metric mounting | |||
| equipment | |||
| M081A61 | metric mounting bolts with M6-thread | -1 | |
| (TO) temperature output | |||
| temperature range | 36 … 302 ° F | 2 … 150 ° C | |
| transcription factor | 5.56 mV / ° F (zero point at 32 °F) | 10 mV / ° C | |
| Electrical connection | 3-Pin | ||
| pin assigNment (PIN A) | acceleration output | ||
| pin assigNment (PIN B) | Mass | ||
| Terminal assigNment (PIN C) | Temperature output |
PCB-HT(M)622A01
