PCB-JM240A03
- ICP® strain sensor,
- Measuring range 300 με,
- Sensitivity 10 mV / με,
- Lower limit frequency 0.004 Hz,
- 10-32 connector on the side,
- Masseisolierung
specifications | |||
---|---|---|---|
basic data | English units | SI units | |
Sensitivity (± 20%) | 10 mV / me | ||
measuring range | 300 with pk | [1] | |
Frequency range (-5%) | 0,004 Hz | [3] | |
Broadband resolution | 0.001 with | [2] | |
linearity error | ≤2 % | [4] | |
Operating conditions | |||
Temperature range (operation) | -65 … 250 °F | -54 … 121 °C | [2] |
Technical characteristics | |||
supply voltage | 20 … 30 VDC | ||
Constant current supply | 2… 20 mA | ||
Bias voltage | 8 … 14 VDC | ||
discharging | ≥150 s | ||
Physical properties | |||
sensor element | quartz | ||
housing material | stainless steel | ||
Electrical connection | 10-32 coaxial | ||
port location | Laterally | ||
seal | epoxy resin | ||
Montagedrehmoment | 7,38 ft-lb | 10 Nm | |
Size - width | 0,67 in | 17 mm | |
Size - length | 1,81 in | 46 mm | |
Size - height | 0,6 in | 15,2 mm | |
Mass | 1,6 oz | 45 grams | [2] |
[5]
Hints | |||
---|---|---|---|
[1] | Based on a sensitivity of 10 mV / με | ||
[2] | typically, | ||
[3] | Calculated on the basis of the discharge time constant | ||
[4] | Zero-based balancing line, determined by the least squares method | ||
[5] | Details: siehe PCB Declaration of Conformance PS023 |
included supply | ||
---|---|---|
081A100 | Flat head screw 1/4 "-28 with hexagon socket | (1) |
Available options | ||||
---|---|---|---|---|
(M) Metric montage | ||||
included supply | ||||
M081A100 | Flat head screw M6 x 1 with hexagon socket | (1) |