PCB-393A03
| basic data | |||
| sensitivity (±5%) | 1,000 mV / g | 102 mV/(m/s²) | |
| range | ± 5 g pk | ±49 m/s² pk | |
| frequency range (±5%) | 0.5 … 2,000 Hz | ||
| Frequency range (± 10%) | 0.3 … 4,000 Hz | ||
| frequency range (± 3 dB) | 0.2 … 6,000 Hz | ||
| Resonance frequency | ≥ 10,000 Hz | ||
| wide band resolution | 0,00001 g RMS | 0.0001 m/s² RMS | [1] |
| Linearity | ≤ 1% | [2] | |
| transverse acceleration sensitivity | ≤ 7% | ||
| conditions of use | |||
| Overload limit (shock) | ±5. 000 g pk | ±49. 050 m/s² pk | |
| Temperature range | -65 … 250 ° F | -54 … 121 ° C | |
| strain sensitivity (base area) | ≤ 0.0005 g/µε | ≤ 0.005 (m/s²)/µε | [1] |
| specifications | |||
| power supply | 18 … 30 V DC | ||
| Constant power supply | 2 … 20 mA | ||
| output impedance | < 250 Ω | ||
| Bias voltage | 8 … 12 V DC | ||
| Discharging charging time constant | 1 … 3 s | ||
| settling | <15 s | ||
| spectral Noise (1 Hz) | 2 µg / √ Hz | 20 (µm / s ²) / √ Hz | [1] |
| spectral noise (10 Hz) | 0,5 µg / √ Hz | 5 (µm / s ²) / √ Hz | [1] |
| Spectral noise (100 Hz) | 0.2 µg / √ Hz | 2 (µm / s ²) / √ Hz | [1] |
| spectral noise (1,000 Hz) | 0.1 µg / √Hz | 1 (µm / s ²) / √ Hz | [1] |
| electrical insulation (housing) | ≥100 MΩ | ||
| physical properties | |||
| Sensor element | ceramic | ||
| geometry of the sensor element | shear principle | ||
| housing material | stainless steel | ||
| Sealing | hermetically sealed | ||
| size - hex | 1 3/16 in | 30.2 mm | |
| size ße - height | 2 3/16 in | 55.6 mm | |
| mass | 7.4 oz | 210 grams | [1] |
| electrical connection | 2-pin connector (MIL-C-5015) | ||
| Connection position | above | ||
| mounting thread | 1/4 "-28 threaded | ||
| " Mounting torque | 2 … 5 ft-lb | 3 … 7 Nm | |
| notes | |||
| [1] | typically | ||
| [2] | zero-based balancing line, determined using the method of least squares | ||
| [3] | details: see PCBs Declaration of conformance PS023 | ||
| Accessories | |||
| 081 B 20 | mounting bolts, with shoulder (1 /) (4 ' 28 1/4"-28) | -1 | |
| 085A31 | temperature protection | -1 | |
| ACS-1 | frequency response, r ückführbar on NIST (10 Hz up to the upper 5% point) | -1 | |
| ACS-4 | low frequency calibration (phase and amplitude) of 0.5 … 10 Hz | -1 | |
| M081B20 | Mounting bolts 1/4 "28 M6 x 0.75 | "-1 | |
| (T) TEDS memory in accordance with IEEE PP1451. 4 | |||
| Bias voltage | 8.5 … 12, 5V DC |
PCB-393A03
