PCB-(M)103B11
    zoom_out_map

      PCB-(M)103B11

      • ICP® pressure sensor with stainless steel membrane,
      • For turbulence measurements,
      • Measuring range 68.6 kPa (190.7 dB),
      • Sensitivity 72.5 mV / kPa,
      • Lower limiting frequency 0.5 Hz,
      • Integrated cable, length 38 cm, ending on stripped and tinned ends
      basic data
      Measurement range (output range ± 5 V)10 psi190.7 dB
      Usable overload range (output range is ± 10 V)20 psi196.7 dB[1]
      Sensitivity (± 15%)500 mV / psi72.5 mV / kPa
      maximum pressure250 psi1724 kPa
      resolution0.06 mpsi86.3 dB
      resonant frequency≥13.000 Hz
      rise time≤25 microseconds
      Lower limit frequency (-5%)5 Hz
      linearity error≤2,0% FS[2]
      Operating conditions
      acceleration sensitivity≤0,0005 psi / g≤0,0035 kPa / (m / s)
      The temperature range (operation)-100 ... 250 ° F-73 ... 121 ° C
      Temperature coefficient of sensitivity≤0,2% / ° F≤0,36% / ° C
      Maximum temperature shock (for split second)1000 ° F538 ° C
      Maximum shock resistance1.000 g pk9807 m / s pk
      Technical characteristics
      Output polarity (positive pressure)positive
      Discharging time (at room temperature)≤0,1 s
      supply voltage20 ... 30 V DC
      Constant current supply2 ... 20 mA
      output impedance≤100 Ω
      Bias voltage7 ... 13 V DC
      physical properties
      sensor elementceramics
      housing materialstainless steel
      membrane316L (stainless steel)
      sealepoxy resin
      electrical connectionintegrated cable
      cable terminationtinned
      Dimensions0.115 oz3,260 grams
      cable typeStranded wires, 32 AWG
      cable length15 in38.1 cm
      Hints
      [1]For an output range up to 10 V, the supply voltage at least 24 V has to DC , respectively. At low bias voltage of the sensor, no negative output range up to -10 V can be used.
      [2]Zero-based line of best fit, determined by the method of least squares
      included supply
      061A04clamp-2
      065A66Adhesive mounting ring-3
      (M) Metric assembly
      included supply
      M061A04clamp-2
      PCB-(M)103B11

      Specific References

      Download

      103B11_drawing.PDF

      Technical drawing

      Download (204.76k)

      103B11_manual.PDF

      Operating instructions

      Download (454.24k)

      103B11_specs.PDF

      Technical data sheet

      Download (137.19k)