PCB-288D01
| basic data | |||
| sensitivity (accelerometer) (±10%) | 100 mV/g | 10.2 mV/(m/s²) | |
| sensitivity (load cell) (±10%) | 22.4 mV / N | ||
| (acceleration sensor) measurement range | ±50 g pk | ±490, 5 m/s² PK | |
| (Force sensor) measurement range | ±50 lbf pk | ±222, 4 N pk | |
| Frequency (acceleration sensor) (±5%) | 1 … 5,000 Hz | ||
| (acceleration sensor) frequency range (± 10%) | 0.7 … 7,000 Hz | ||
| Rise time (load cell) | < 10 µs | [1] | |
| resonance frequency (assembled) | ≥20,000 Hz | ||
| Resonance frequency < br(nicht montiert; keine Last) | > 40,000 Hz | ||
| frequency range for phase shift ± 5 ° | 4 … 5,000 Hz | ||
| Wide band resolution (accelerometer) | 0.002 g RMS | 0.02 m/s² RMS | [1] |
| Wide band resolution (load cell) | 0.002 lb | 0,0089 N | [1] |
| linearity | ≤1% | [2] | |
| Transverse acceleration sensitivity | ≤5% | ||
| maximum force | 500 lb | 2.224 N | |
| conditions | |||
| Temperature range (operation) | 0 …200 °F | 18 … 95 ° C | |
| Temperaturffekt (accelerometer) | ≤0,05 %/°F | ≤0.09 %/°C | [1] |
| Temperaturffekt (load cell) | ≤ 0.03 %/°F | ? 0.05 %/°C | [1] |
| strain sensitivity (base area; Accelerometer) | ? 0.0007 g/µε | ? 0.007 (m/s²)/µε | [1] |
| maximum shock resistance | 3,000 g pk | 29.430 m/s² pk | |
| Specifications | |||
| power supply | 22 … 30 V DC | ||
| constant power supply | 2 … 20 mA | ||
| Discharging charging time constant (accelerometer) | 0.4 … 1 | ||
| discharging charging time constant (load cell) | ? 60 s | ||
| Bias voltage | 8 … 14 V DC | ||
| output impedance | < 250Ω | ||
| (Acceleration sensor) output polarity | positive | ||
| output polarity (load cell) | positive | ||
| spectral noise (1 Hz; Accelerometer) | 1,962 (µm / s ²) / √Hz | [1] | |
| spectral noise (10 Hz; Accelerometer) | 50 µg / √Hz | 490,5 (µm / s ²) / √Hz | [1] |
| spectral noise (100 Hz; Accelerometer) | 10 µg / √Hz | 98.1 (µm / s ²) / √Hz | [1] |
| Spectral noise (1,000 Hz; Accelerometer) | 3 µg / √Hz | 29.4 (µm / s ²) / √Hz | [1] |
| physical properties | |||
| sensor element (accelerometer) | ceramic | ||
| (Load cell) sensor element | quartz | ||
| geometry of the sensor element (accelerometer) | shear principle | ||
| Geometry of the sensor element (load cell) | compression principle | ||
| housing material | titanium | ||
| sealing | Hermetically sealed welded | ||
| size - Allen | 11/16 in | 17.46 mm | |
| size - height | 0,820 in | 20.83 mm | |
| mass | 0.68 oz | 19.2 grams | [1] |
| electrical connection (accelerometer) | 10-32-coaxial socket | ||
| Electrical connection (load cell) | 10-32-coaxial socket | ||
| mounting thread (top and bottom) | 10-32 female thread | ||
| Assembly torque | 10 … 20 in-lb | 1.1 … 2.2 Nm | |
| stiffness | 2.0 lb/µin | 0.35 kN/µm | [1] |
| notes | |||
| [1] | typically | ||
| [2] | zero-based balancing line, determined using the method of least squares | ||
| included Accessories | |||
| 080A | adhesive mounting | -1 | |
| 081 B 05 | mounting bolts (10-32 on) 10-32) | 2 | |
| HCS-3 | series 288, calibration traceable to NIST | -1 | |
| 081 B 05 | Mounting bolts 10-32 to M6 x 0.75 | 2 | |
| (T) TEDS memory in accordance with IEEE PP1451. 4 | |||
| Bias voltage | 8 … 15 V DC | ||
| (TLA) TEDS LMS International - free format | |||
| Bias voltage | 8 … 15 V DC | ||
| (TLB) TEDS LMS International -. Format for dis automobile industry | |||
| Bias voltage | 8 … 15 V DC | ||
| (TLC) TEDS LMS international - format for the aviation industry | |||
| Bias voltage | 8 … 15 V DC | ||
| (TLD) TEDS memory in accordance with IEEE P1451. 4 | |||
| Bias voltage | 8 … 15 V DC | ||
| additional information | |||
| measure | acceleration
|
PCB-288D01
