PCB-(M)629A10
zoom_out_map

PCB-(M)629A10

  • Triaxial industrial ICP® vibration sensor,
  • With through hole,
  • Measuring range 500 g
  • Sensitivity 10 mV / g,
  • Frequency range 0.8 … 8,000 Hz,
  • Frequency response calibration,
  • Integrated cable, length 3 m,
    ending on cut end
  • "
    basic data
    sensitivity (±5%) 10 mV / g 1 mV/(m/s²) [5]
    measuring range ≤500 Ω ±4. 905 m/s 2
    Frequency range (±5%) 144 … 120,000 cpm 2.4 … 2,000 Hz [6] [7]
    frequency range (± 10%) 102 … 300,000 cpm 1.7 … 5,000 Hz
    frequency range (± 3 dB) 48 … 480,000 cpm 0.8 … 8,000 Hz
    resonance frequency 1.200 kcpm 20,000 Hz [1]
    wide band resolution 316 µg 3,100 µm / s ² [1]
    linearity ≤1% [2]
    Transverse acceleration sensitivity ≤ 5%
    conditions of use
    Overload limit (shock) 5,000 g PK 49,050 m/s² pk
    Temperature range -65 … 250 ° F -54 … 121 ° C
    technical
    settling time(on bias voltage ± 1%) ≤ 3.0 s
    Discharging charging time constant ≥ 0.2 s
    power 18 … 28 V DC
    Constant power supply 2 … 20 mA
    output impedance < 100 Ω
    Bias voltage 8 … 12 V DC
    Spectral noise (10 Hz) 22.1 µg / √ Hz 217 (µm / s ²) / √ Hz [1]
    spectral noise (100 Hz) 8.9 µg /. √ Hz 87,3 (µm / s ²) / √ Hz [1]
    spectral noise (1,000 Hz) 3.2 µg / √ Hz 31.4 (µm / s ²) / √ Hz [1]
    Electrical protection RFI/ESD
    Electrical insulation (housing) ≥ 100 MΩ
    physical properties
    size - length 1.5 at 38.1 mm
    Size - width 1.5 in 38.1 mm
    size - height 0.82 in 20.8 mm
    dimensions (without cord) 4.9 oz 139 grams
    Mounting thread 1/4"-28 No metric equivalent [3]
    Assembly torque 2 … 5 ft-lb 2.7 … 6.8 Nm
    Sensor element ceramic
    geometry of the sensor element shear principle
    housing material Stainless steel
    sealing hermetically sealed welded
    electrical connection potted integrated cable
    Cable exit side
    connections (red wire) x
    pin assigNment (gr Grüne core) y
    connections (white wire) Z axis
    pin assigNment (black wire) ground
    Cable length 10 ft 3.0 m
    Cable type polyurethane [4]
    notes
    [1] typically
    [2] Zero-balance just, determined using the method of least squares
    [3] mounting with M6 screw possible
    [4] 4-conductor shielded cable with twisted wire
    [5] conversion factor 1 g = 9.81 m/s²
    [6] tolerance of the upper cutoff frequency: ±10%
    [7] 1 Hz 60 = cpm ("Cycles Per Minute": rpm).
    [8] details: see PCBs Declaration of conformance PS023
    equipment
    081A56 mounting screw 1/4 "-28 x 0.75 " -1
    ICS-5 frequency response for Triaxial sensors from 10 Hz up to the upper 5% frequency -1
    (M) metric mounting
    PCB-(M)629A10

    Specific References

    Download

    629A10_drawing.PDF

    Technical drawing

    Download (43.49k)

    629A10_manual.PDF

    Operating instructions

    Download (971.32k)

    629A10_specs.PDF

    Technical data sheet

    Download (175.94k)