PCB-208C01
basic data | |||
sensitivity (±15%) | /500 mV / lb | 112.410 mV / kN | |
measuring range (pressure) | 10 lb | 0,04448 kN | |
Measuring range (traction) | 10 lb | 0,04448 kN | |
maximum permissible static load (force) | 60 lb | 0.27 kN | |
maximum static force (traction) | 60 lb | 0.27 kN | |
wide band resolution | 0.0001 lb RMS | 0,00045 N RMS | [1] |
Lower limiting frequency (-5%) | 0.01 Hz | [2] | |
upper limit frequency | 36,000 Hz | [4] | |
linearity error | ≤ 1% FS | [3] | |
conditions | |||
temperature range | -65 … 250 ° F | -54 … 121 ° C | |
temperature coefficient Temperature coefficient of sensitivity | ≤0,05 %/°F | ≤0.09 %/°C | |
technical properties | |||
discharge charge time constant (at room temperature) | ≥ 50 s | ||
Power | 18 … 30 V DC | ||
constant power supply | 2 … 20 mA | ||
Output impedance | ≤ 100 Ω | ||
Bias voltage | 8 … 12 V DC | [5] | |
Spectral noise (1 Hz) | 0,0000126 lb / √ Hz | 0,0000562 N / √ Hz | [1] |
spectral noise (10 Hz) | 0,00000424 lb / √ Hz | 0,0000189 N / √ Hz | [1] |
spectral noise (100 Hz) | 0,00000149 lb / √ Hz | 0,00000665 N / √ Hz | [1] |
spectral noise (1,000 Hz) | 0,000000522 lb / √ Hz | 0,00000233 N / √ Hz | [1] |
(pressure) output polarity | positive | ||
physical properties | |||
stiffness | 6 lb/µin | 1.05 kN/µm | [1] |
Size - hex | 0.625 in | 15.88 mm | |
size - height | 0.625 in | 15.88 mm | |
Size - diameter of the measuring surface | 0.500 in | 12.7 mm | |
dimensions | 0.80 oz | 22.7 grams | |
Housing material | stainless steel | ||
sealing | hermetically sealed | ||
electrical connection | 10-32-coaxial socket | ||
Connection position | side | ||
mounting thread | 10-32 female thread | ||
Mounting torque (recommended) | 16 … 20 in-lb | 181 … 226 NCM | |
notes | |||
[1] | typically | ||
[2] | on base calculates the discharge load time constant | ||
[3] | zero-based balancing line, determined using the method of least squares | ||
[4] | Accepted value determined on the basis of solid state Dynamics calculations | ||
[5] | the sensor contains a protected amplifier electronics, so a relatively long Time possible is. | ||
[6] | details: see PCBs Declaration of conformance PS023 | ||
equipment | |||
080A81 | adhesive for thread lock | -1 | |
081 B 05 | mounting bolts (10-32 on 10-32) | 2 | |
084A03 | premium cap | -1 | |
M081A62 | mounting bolts, 10-32 to M6 x 1, BeCu, with shoulder | 2 | |
(S) negative output polarity | |||
(W) waterproof cable connection | |||