PCB-356A16
- Triaxial ICP®-modal vibration sensor,
- Measurement range 50 g,
- Sensitivity 100 mV/g,
- Frequency range 0.5... 5,000 Hz,
- 4-pin female connector on the side
| Basic data | |||
| Sensitivity (±10 %) | 100mV/g | 10.2 mV/(m/s²) | |
| Measuring range | ±50 gPK | ±490 m/s²PK | |
| Frequency range (Y - and Z-axis) (≤5 %) | 0.5... 5,000 Hz | ||
| Frequency range (X-axis) (≤5 %) | 0.5... 4,500 Hz | ||
| Frequency range (±10) | 0.3... 6,000 Hz | ||
| Resonance frequency | ≥25. 000 Hz | ||
| Phase response (±5 °) | 1.0... 5,000 Hz | ||
| Wide band resolution | 0.0001 g RMS | 0.001 m/s² RMS | [1] |
| Linearity error | ≤1 % | [2] | |
| Transverse acceleration sensitivity | ≤5 % | ||
| Conditions of use | |||
| Overload limit (shock) | ±7.000 gPK | ±68. 600 m/s² pk | |
| Temperature range (operation) | 65... 176 ° F | -54... 80 ° C | |
| strain sensitivity (footprint) | 0.001 g/µε | 0.01 (m/s²)/µε | [1] |
| specifications | |||
| power supply | 20... 30 V DC | ||
| constant power supply | 2... 20 mA | ||
| output impedance | ≤200 Ω | ||
| Bias voltage | 8... 12 V DC | ||
| discharging charging time constant | 1.0... 3.0 s | ||
| settling time (auf Bias-Spannung ±10 %) | < 10 s | ||
| spectral noise (1 Hz) | 40 µg/√Hz | 392 (µm/s²)/√Hz | [1] |
| spectral noise (10 Hz) | 10 µg/√Hz | 98 (µm/s²)/√Hz | [1] |
| spectral Rauschen (100 Hz) | 3 µg/√Hz | 29.4 (µm/s²)/√Hz | [1] |
| Spectral noise (1,000 Hz) | 1 µg/√Hz | 9.8 (µm/s²)/√Hz | [1] |
| Spectral noise (10,000 Hz) | 0.5 µg/√Hz | 4.9 (µm/s²)/√Hz | [1] |
| Physical properties | |||
| Sensor element | Ceramic | ||
| Geometry of the sensor element | Shear principle | ||
| Housing material | Anodized aluminium | ||
| Sealing | Epoxy resin | ||
| Size - height | 0.55 in | 14.0 mm | |
| Size - length | 0.80 in | 20.3 mm | |
| Size - width | 0.55 in | 14.0 mm | |
| Mass | 0.26 oz | 7.4 grams | [1] |
| Electrical connection | 1/4 "-28 4-pin | ||
| Connecting position | On the side | ||
| Mounting thread | 10-32 female thread | ||
| Installation torque | 10... 20 in-lb | 113... 225 NCM | |
| Notes | |||
| [1] | Typically | ||
| [2] | Zero-balance just, determined using the method of least squares | ||
| Included accessories | |||
| 080A109 | Mount wax | -1 | |
| 080A12 | Adhesive mounting | -1 | |
| 081B 05 | Mounting bolts (10-32 on 10-32) | -1 | |
| ACS-1T | Frequency response for Triaxial accelerometer, traceable to NIST, 10 Hz up to the upper 5%-Frequenz | -1 | |
| M081B05 | Mounting bolts 10-32 to M6 x 0.75 | -1 | |
| (A) bonding | |||
| Included accessories | |||
| 080A90 | Superglue | -1 | |
| 080A109 | Mount wax | -1 | |
| (T) TEDS memory in accordance with IEEE PP1451. 4 | |||
| Temperature range (operation) | 65... 176 ° F | -54... 80 ° C | |
| Bias voltage | 8.5... 13.0 V DC | ||
| (TLA) TEDS LMS International - free format | |||
| Temperature range (operation) | 65... 176 ° F | -54... 80 ° C | |
| Bias voltage | 8.5... 13.0 V DC | ||
| (TLB) TEDS LMS international - format for the automotive industry | |||
| Temperature range (operation) | 65... 176 ° F | -54... 80 ° C | |
| Bias voltage | 8.5... 13.0 V DC | ||
| (TLC) TEDS LMS international - format for the aviation industry | |||
| Temperature range (operation) | 65... 176 ° F | -54... 80 ° C | |
| Bias voltage | 8.5... 13.0 V DC | ||
| (TLD) TEDS memory in accordance with IEEE P1451. 4 | |||
| Temperature range (operation) | 65... 176 ° F | -54... 80 ° C | |
| Bias voltage | 8.5... 13.0 V DC |
PCB-356A16
