PCB-356A13
zoom_out_map

PCB-356A13

  • Triaxial ICP® miniature vibration sensor,
  • Mass 1 gram,.
  • Measuring range 1000 g,
  • Sensitivity 5 mV / g,.
  • Frequency range 2... 8,000 Hz,
  • Integrated light connection cable, length 1.5 m,
    ending on 4-pin female connector.
  • Including extension cable, length 1.5 m,
    ending on three BNC plugs

 

Basic data
Sensitivity (±20 %) 5 mV / g 0.51 mV/(m/s²)  
 
Measuring range ±1.000 gPK ±9.810 m/s²PK  
 
Frequency range (Y - and Z-axis)
(≤5 %)
2... 8,000 Hz    
 
Frequency range (X-axis) (≤5 %) 2... 5,000 Hz    
 
Frequency range (X-axis) (+ 1 dB) ≤8. 000 Hz    
 
Resonance frequency ≥50.000 Hz    
 
Wide band resolution 0.003 g RMS 0.03 m/s² RMS [3]
 
Linearity error ±1 %   [2]
 
Transverse acceleration sensitivity ≤5 %    
Conditions of use
Overload limit (shock) ±10.000 gPK ±98.100 m/s²PK
 
temperature range (operation) -65... 250 ° F -54... 121 ° C [4]
specifications
power supply 18... 30 V DC    
 
constant power supply 2... 20 mA    
 
output impedance ≤200Ω    
 
Bias voltage 7... 11 V DC    
 
discharging charging time constant 0.24...1.0 s    
 
settling time
(auf Bias-Spannung ±10 %)
< 3s    
 
spectral noise (1 Hz) 1.200 µg/√Hz 11.772 (µm/s²)/√Hz [3]
 
spectral noise (10 Hz) 300 µg/√Hz 2.943 (µm/s²)/√Hz [3]
 
spectral noise (100 Hz) 100 µg/√Hz 981 (µm/s²)/√Hz [3 ]
 
Spectral noise (1,000 Hz) 30 µg/√Hz 294 (µm/s²)/√Hz [3]
Physical properties
Sensor element Ceramic    
 
Geometry of the sensor element Shear principle    
 
Housing material Titanium    
 
Sealing Hermetic    
 
Size - height 0.25 in 6.35 mm  
 
Size - length 0,375 in 9.53 mm  
 
Size - width 0.25 in 6.35 mm  
 
Weight (without cable) 0.04 oz 1.0 grams [3]
 
Electrical connection Integrated cable    
 
Cable outlet On the side    
 
Cable termination 1/4 "-28 4-pin connector    
 
Cable length 5 ft 1.5 m [1]
 
Cable type Type 099, four twisted wires    
 
Mountfree Adhesive mounting    
Notes
[1] So the noise levels exceed the specifications not due to electromagnetic interference and cross-talk, the integrated cable length must not exceed maximum 1.5 metres.    
 
[2] Zero-balance just, determined using the method of least squares    
 
[3] Typically    
 
[4] The data for temperatures above 121 ° C applies only for transducers with HT option.    
Included accessories
034 G 05 4-wire shielded cables, 1.5 meter, 4-pin connector to three BNC -1  
 
080A109 Mount wax -1  
 
080A90 Superglue -1  
 
ACS-1T Frequency response for Triaxial accelerometer, traceable to NIST, 10 Hz up to the upper 5%-Frequenz -1  
(HT) High temperature electronics
Temperature range 65... 325 ° F -54... 163 ° C  
PCB-356A13

Specific References

Download

356A13_drawing.PDF

Technical drawing

Download (478.44k)

356A13_manual.PDF

Operating instructions

Download (2.06M)

356A13_specs.PDF

Technical data sheet

Download (32.38k)