PCB-356A04/NC
- Triaxial ICP®/IEPE miniatur vibration sensor
- Operating temperature up to 163 ° C
- Measuring range 5,000 g
- Sensitivity 1 mV / g
- Frequency range 1… 6,000 Hz
- Integrated, highly flexible connection cable, length 1.5 meters,
- ending on 4-pin connector
- Without connection cable
| specifications | |||
|---|---|---|---|
| basic data | English units | SI units | |
| Sensitivity (± 20%) | 1 mV/g | 0,10 mV/(m/s²) | |
| measuring range | ± 5,000 g pk | ±49.050 m/s²pk | |
| Frequency range (+/- 5%) | 1.2 … 6.000 Hz | ||
| Frequency range (+/- 10%) | 1 … 10.000 Hz | ||
| resonant frequency | ≥50 kHz | ||
| Broadband resolution | 0,02 gRMS | 0,02 m/s²RMS | [1] |
| Linearitätsfehler | ≤1 % | [2] | |
| Lateral acceleration sensitivity | ≤5 % | ||
| Operating conditions | |||
| Overload limit (shock) | ± 10,000 g pk | ±98.100 m/s²pk | |
| Temperature range (operation) | -65 … to +325 °F | ||
| temperature range | See graph | [1] | |
| Strain sensitivity (base area) | ≤0.05 g / me | ≤0.5 (m / s²) / me | [1] |
| Technical characteristics | |||
| excitation voltage | 18 … 30 VDC | ||
| Constant current supply | 2 ... 20 mA | ||
| output impedance | ≤100 Ω | ||
| Bias voltage | 8 … 12 VDC | ||
| discharging | 0,4 … 1,2 s | ||
| Settling time (on bias voltage ± 10%) | <3 s | ||
| Spectral noise (1 Hz) | 4.7 mg/√Hz | 46 mm/s²/√Hz | [1] |
| Spectral noise (10 Hz) | 1.2 mg/√Hz | 11.8 mm/s²/√Hz | [1] |
| Spectral noise (100 Hz) | 0.48 mg/√Hz | 4.71 mm/s²/√Hz | [1] |
| Spectral noise (1 kHz) | 0.17 mg/√Hz | 1.67 mm/s²/√Hz | [1] |
| Spectral noise (10 kHz) | 0.13 mg/√Hz | 1.28 mm/s²/√Hz | [1] |
| Physical properties | |||
| sensor element | ceramics | ||
| Geometry of the sensor element | Scherprinzip | ||
| housing material | Titan | ||
| seal | Hermetically | ||
| Size - height | 0,25 in | 6,35 mm | |
| Size - length | 0,25 in | 6,35 mm | |
| Size - width | 0,25 in | 6,35 mm | |
| Mass (without cable) | 0,03 oz | 0.8 grams | [1] |
| Electrical connection | Integrated cable | ||
| Kabelabgang | Laterally | ||
| cable termination | 1/4 4-Pin Jack | ||
| cable length | 5 ft | 1,5 m | |
| cable type | 019 4-way shielded | ||
| attachment | adhesive mounting | ||
[3]
| Hints | |||
|---|---|---|---|
| [1] | typically, | ||
| [2] | Zero-based best-fit line, determined using the least squares method | ||
| [3] | Details: siehe PCB Declaration of Conformance PS023 | ||
| included supply | ||
|---|---|---|
| 080A109 | mounting wax | (1) |
| 080A90 | superglue | (1) |
| ACS-1T | Frequency response for triaxial transducers, traceable to NIST, 10 Hz up to the upper 5% frequency | (1) |
PCB-356A04/NC
