PCB-3711F1130G
- MEMS accelerometer
- Suitable for measuring static accelerations
- Measuring range ± 30 g pk (± 294.2m / s²)
- Sensitivity (± 3%) 45 mV / g (4.59mV / (m / s²))
- Frequency range (± 5%) 0… 1,500 Hz
- Supply voltage 5… 32 V DC
- 4-pin connection socket on the side
Specifications | |||
---|---|---|---|
Basic data | English units | SI units | |
Sensitivity (± 5%) | 45 mV/g | 4,59 mV/(m/s²) | |
Measuring range | ± 30 g pk | ±294,2 m/s²pk | |
Frequency range (± 5%) | 0 … 1.500 Hz | ||
Frequency range (± 10%) | 0 … 2.000 Hz | ||
Resonance frequency | 5.200 Hz | [7] | |
Phase response (100 Hz) | <10 ° | ||
Broadband resolution | 1 mg rms | 0,01 m/s²RMS | [3] |
Linearitätsfehler | ≤1 % | [2] | |
Lateral acceleration sensitivity | ≤3 % | ||
Conditions of use | |||
Overload limit (shock) | ± 5,000 g pk | ±49.050 m/s²pk | |
Temperature range (operation) | -65 … 250 °F | -54 … 121 °C | |
Temperature range (storage) | -65 … 250 °F | -54 … 121 °C | |
Temperature coefficient of sensitivity | ±2,5 % | [1] | |
Temperature coefficient of the zero point | ±1,5 % FSO | [1] | |
Stretch sensitivity (base area) | 0.001 g / ml | 0.01 (m / s²) / ε | [3] |
Magnetic sensitivity | 40 µg/Gs | 3,9 (m/s²)/T | [3] |
Technical characteristics | |||
Supply voltage | 5 … 32 VDC | ||
Power consumption | ≤5 mA | ||
Output impedance | ≤120 Ω | ||
Voltage offset | -20 … 20 mVDC | [4] | |
Spectral Noise (1) | 120 µg/√Hz | 1.177 (µm / s²) / √Hz | [3] |
Electrical insulation (housing) | >100 MΩ | ||
Physical characteristics | |||
Housing material | Titan | ||
seal | Hermetically sealed | ||
Size - height | 0,45 in | 11,4 mm | |
Size - length | 0,85 in | 21,6 mm | |
Size - width | 0,85 in | 21,6 mm | |
Mass | 0,58 oz | 16.3 grams | |
Electrical connection | 4-Pin | ||
Connection position | Laterally | ||
Attachment | Through hole |
Hints | |||
---|---|---|---|
[1] | -54… 121 ° C, reference 24 ° C | ||
[2] | Zero-based best-fit line, determined using the least squares method | ||
[3] | Typically | ||
[4] | Offset with 3 meter cable length (type 010) | ||
[5] | Details: siehe PCB Declaration of Conformance PS027 | ||
[6] | Measured at 100 Hz, 1 grms. | ||
[7] | Typical value |
included supply | ||
---|---|---|
080A152 | Fastening clip | (1) |
081A113 | Mounting screw | (2) |
ACS-172 | Calibration of the amplitude and phase response from 5 Hz to the upper ± 5% frequency range | (1) |
M081A113 | Metric mounting screw | (2) |