PCB-054236-01804
    zoom_out_map

      PCB-054236-01804

      • DMS miniature measuring washer
        for the measurement of static forces,
      • Screw diameter 36 mm,.
      • Range 680 kN,
      • Nominal 1.5 mV / V,.
      • Integrated cable, length 1.5 m,
        ending on open ends
      basic data
      measuring range152,870 lb680 kN[2]
      characteristic value1.50 mV / V[1] [2]
      linearity error± 5% FS[1]
      hysteresis± 5% FS[1]
      repeatability± 2% FS[1]
      resonant frequency10,000 Hz
      Operating conditions
      Overload limit229,305 lb1,020 kN
      The temperature range (operation)0 ... 200 ° F-18 ... 93 ° C
      Temperature range (compensated)No information
      Influence of temperature on the output signal (maximum)± 0.02%. Reading / ° F± 0.036% v. Reading / ° C[3]
      Temperature influence on the deviation from zero (maximum)≤0.02% FS / ° F± 0.036% FS / ° C[1]
      Technical characteristics
      bridge resistance350 ?[2]
      Supply voltage (recommended)10 V DC[4]
      output polaritypositive
      physical properties
      Size - Diameter3.13 in78.9 mm
      Size - Height0.875 in22.2 mm
      Screw diameter1.417 in36 mm
      Diameter of the through hole1.426 in36.19 mm
      sensor elementStrain gauges
      electrical connectiontinned
      cable outletLaterally
      Hints
      [1]FS = "Full Scale": full scale
      [2]Nominal
      [3]Over the compensated temperature range
      [4]Calibrated with 10 V DC supply voltage; Supply with 5 ... 20 V DC or VAC RMS possible
      additional information
      descriptionmounting sleeve
      characteristicsThread: 5/16 "-24-2A
      • For series PCB-111, PCB-112, PCB-113
      descriptionmounting sleeve
      characteristicsThread: M7 x 0.75
      • For series PCB-111, PCB-112, PCB-113
      descriptionmounting sleeve
      characteristicsThread: 3/4 "-16
      • For models PCB 106B50, PCB 106B51, PCB 106B52
      descriptionmounting sleeve
      characteristicsThread: 9/16 "-18-2A
      • For models PCB 106B, 116B PCB, PCB-106M131
      descriptionmounting sleeve
      characteristicsThread: M20 x 1,5-6g
      • For models PCB 106B50, PCB 106B51, PCB 106B52
      descriptionmounting sleeve
      characteristicsThread: M14 x 1.25
      • For models PCB 106B, 116B PCB, PCB-106M131
      descriptionThreaded Adapter
      characteristicsThread: 3/8 "-24 to 5/16" -24
      • For series PCB-111, PCB-112, PCB-113
      descriptionThreaded Adapter
      characteristicsThread: M10 x 1 to 5/16 "-24
      • For series PCB-111, PCB-112, PCB-113
      descriptionThreaded Adapter
      characteristicsThread: 1/8 "-27 NPT to 5/16" -24
      • For series PCB-111, PCB-112, PCB-113
      TypeOscilloscope adapter
      connector 110-32 socket
      connector 2BNC connector
      Typeadapter
      connector 110-32 plug
      connector 2BNC connector
      Typecable coupling
      connector 110-32 socket
      connector 210-32 socket
      Typecable coupling
      connector 110-32 socket
      connector 2BNC connector
      TypeT-connector
      connector 1BNC connector
      connector 22x BNC socket
      Typecable coupling
      connector 1BNC connector
      connector 2BNC connector
      Typesealed passage
      connector 1BNC connector
      connector 210-32 socket
      Typesealed passage
      connector 110-32 socket
      connector 210-32 socket
      Typeangle connector
      connector 110-32 plug
      connector 210-32 socket
      Typesolder adapter
      connector 110-32 plug
      connector 2solder tabs
      descriptionTwo-component adhesive
      characteristicsSmall containers
      • epoxy resin
      PCB-054236-01804

      Specific References

      Download

      0542xx-01xxx_drawing.pdf

      Technical drawing

      Download (466.12k)

      054236-01804_manual.pdf

      Operating instructions

      Download (882.26k)

      054236-01804_specs.pdf

      Technical data sheet

      Download (13.44k)