PCB-(M)226C
zoom_out_map

PCB-(M)226C

  • ICP® force measuring element,
  • Measuring range 89 …?200 ?N,
  • Sensitivity 24.7 mV / kN,
  • Frequency range 0.0003 … 5,000 Hz,
  • 10-32 female connector on the side
  • basic data
    sensitivity (±15%) 0.11 mV / lb 24.73 mV / kN
    measuring range (pressure) 45,000 lb 200,16 kN
    Measuring range (traction) 20,000 lb 88,96 kN
    maximum permissible static load (force) 55,000 lb 244,65 kN
    Maximum permissible static load (traction) 25,000 lb 111,21 kN
    wide band resolution 0.44 lb RMS 1.96 N RMS [1]
    Lower limiting frequency (-5%) 0.0003 Hz [2]
    upper limit frequency 5,000 Hz [4]
    linearity error ≤ 1% FS [3]
    conditions
    temperature range -65 … 250 ° F -54 … 121 ° C
    temperature coefficient Temperature coefficient of sensitivity ≤ 0.03 %/°F ≤ 0,054 %/°C
    technical properties
    discharge charge time constant (at room temperature) ≥ 2,000 s
    Supply 20 … 30 V DC
    constant power supply 2 … 20 mA
    Output impedance ≤ 100 Ω
    Bias voltage 8 … 14 V DC
    Spectral noise (1 Hz) 0,0248 lb / √ Hz 0,111 N / √ Hz [1]
    spectral noise (10 Hz) 0,0118 lb / √ Hz 0.053 N /. √ Hz [1]
    spectral noise (100 Hz) 0,00414 lb / √ Hz 0.018 N / √ Hz [1]
    spectral noise (1,000 Hz) 0,00131 lb / √ Hz 0,00585 N / √ Hz [1]
    (pressure) output polarity positive
    physical properties
    stiffness 11 lb / µ in 1.9 kN/µm [1]
    size - diameter 2.05 in 52,07 mm
    size - height 3.50 in 88,90 mm
    Dimensions 32 oz 907 grams [1]
    housing material stainless steel
    sealing hermetic
    Electrical connection 10-32-coaxial socket
    connection position side
    Mounting thread 1-12 female no equivalent
    notes
    [1] typically
    [2] on the basis of the Calculated discharge charge time constant
    [3] zero-based balancing line, determined using the method of least squares
    [4] Accepted value determined on the basis of solid state Dynamics calculations
    [5] details: see PCBs Declaration of conformance PS023
    (M) metric Assembly
    (S) negative output polarity
    (W) waterproof cable
    Electrical connection sealed cable
    Cable outletOn the side
    PCB-(M)226C

    Specific References

    Download

    226C_drawing.PDF

    Technical drawing

    Download (46.67k)

    226C_manual.PDF

    Operating instructions

    Download (893.69k)

    226C_specs.PDF

    Technical data sheet

    Download (51.21k)