PCB-(M)225C
basic data | |||
sensitivity (±15%) | 0.14 mV / lb | 31,47 mV / kN | |
measuring range (pressure) | 35,000 lb | 155,69 kN | |
Measuring range (traction) | 12,000 lb | 53,38 kN | |
maximum permissible static load (force) | 42,500 lb | 189,05 kN | |
Maximum permissible static load (traction) | 15,000 lb | 66.73 kN | |
wide band resolution | 0.1 lb RMS | 0,445 N RMS | [1] |
Lower limiting frequency (-5%) | 0.0003 Hz | [2] | |
upper frequency limit | 6,000 Hz | [4] | |
linearity error | ≤ 1.5% FS | [3] | |
conditions | |||
temperature range | -65 … 250 ° F | -54 … 121 ° C | |
Temperature coefficient of sensitivity | ≤ 0.03 %/°F | ≤ 0,054 %/°C | |
technical properties | |||
discharge charge time constant (at room temperature) | ≥ 2,000 s | ||
Supply | 20 … 30 V DC | ||
constant power supply | 2 … 20 mA | ||
Output impedance | ≤ 100 Ω | ||
Bias voltage | 8 … 14 V DC | ||
Spectral noise (1 Hz) | 0,0204 lb / √ Hz | 0,0911 N / √ Hz | [1] |
spectral noise (10 Hz) | 0,00986 lb / √ Hz | 0,0440 N / √ Hz | [1] |
spectral noise (100 Hz) | 0,00328 lb / √ Hz | 0,0146 N / √ Hz | [1] |
spectral noise (1,000 Hz) | 0,00110 lb / √ Hz | 0,00491 N / √ Hz | [1] |
(pressure) output polarity | positive | ||
physical properties | |||
stiffness | 6 lb /. µin | 1.05 kN/µm | [1] |
size - diameter | 1.58 in | 40,13 mm | |
size - height | 3.00 in | 76.2 mm | |
Weight | 14.5 oz | 412 g | |
housing material | stainless steel | ||
sealing | hermetic | ||
Electrical connection | 10-32-coaxial socket | ||
connection position | side | ||
Mounting thread | ¾-16 female | ||
notes | |||
[1] | typically | ||
[2] | on the basis of discharging charging time constant calculated | ||
[3] | zero-based balancing line, determined using the method of least squares | ||
[4] | assume that value to determine Solid state Dynamics calculations based on | ||
[5] | details: see PCBs Declaration of conformance PS023 | ||
(M) metric mounting | |||
(S) negative output polarity | |||
(W) waterproof cable | |||
wiring | Sealed cable connection | ||
Cable outlet | On the side |