PCB-(M)216B
| basic data | |||
| sensitivity (±15%) | 18 pC/lb | 4.047 pC/kN | |
| measuring range (pressure) | ≤ 80,000 lb | ≤ kN 355,84 | |
| Maximum permissible static load (force) | 90,000 lb | 400,32 kN | |
| upper frequency limit | ,40,000 Hz | [1] [2] | |
| Linearity error | ≤ 1.25% FS | [3] | |
| conditions | |||
| temperature range | 100 … 400 ° F | 73 … 204 ° C | |
| Temperature coefficient of sensitivity | ≤ 0.03 %/°F | ≤ 0,054 %/°C | |
| Technical properties | |||
| capacity | 80 pF | [4] | |
| Insulation resistance | ≥ 1T Ω | ||
| physical properties | |||
| preload | 16,000 lb | 71,172 kN | |
| Stiffness | 74 lb/µin | 13 kN/µm | [4] |
| size - diameter | 2.05 in | 52.9 mm | |
| size - height | 0,590 in | 15 mm | |
| Size - inner diameter (hole diameter) | 1,025 in | 26.04 mm | |
| size - diameter of the measuring surface | 1,750 in | 44.5 mm | |
| Mass | 5.48 oz | 155 grams | |
| housing material | stainless steel | ||
| sealing | Hermetically sealed | ||
| electrical connection | 10-32-coaxial socket | ||
| connection position | side | ||
| Notes | |||
| [1] | suppose value determined on the basis of solid state Dynamics calculations | ||
| [2] | the lower cutoff frequency and the system noise depend on the used signal conditioning electronics. | ||
| [3] | zero-based balancing line, determined using the method of least squares | ||
| [4] | typically | ||
| Accessories supplied | |||
| 080A82 | grease | -1 | |
| 081A16 | mounting bolts, 7/8-14 x 1,900 ", BeCu | -1 | |
| 082 B 06 | washer | -1 | |
| 083 B 06 | mounting sleeve (for the models 206 C and 216 B) | -1 | |
| (M) Metric mounting | |||
| equipment | |||
| 080A82 | grease | -1 | |
| M081A16 | mounting bolts. M22 x 2.00 x 1,900 ", BeCu | -1 | |
| 082 B 06 | washer | -1 | |
| M083B06 | mounting sleeve | -1 | |
| (P) positive output voltage | |||
| (W) waterproof cable | |||
| wiring | potted integrated cable | ||
| Cable exit | side |
PCB-(M)216B
