PCB-(M)215B
| basic data | |||
| sensitivity (±15%) | 18 pC/lb | 4.047 pC/kN | |
| measuring range (pressure) | ≤ 60,000 lb | ≤ 266.9 kN | |
| Maximum permissible static load (force) | 70,000 lb | 311.4 kN | |
| upper frequency limit | 50,000 Hz | [1] [2] | |
| Linearity error | ≤ 1.5% FS | [3] | |
| conditions | |||
| temperature range | 100 … 400 ° F | 73 … 204 ° C | |
| Temperature coefficient of sensitivity | ≤ 0.03 %/°F | ≤ 0,054 %/°C | |
| Technical | |||
| capacity | 38 pF | [4] | |
| insulation resistance | ≥ 1T Ω | ||
| Physical properties | |||
| 12,000 lb | 53,379 kN | preload | |
| stiffness | 40 lb/µin | 7 kN/µm | [4] |
| Gr öße - diameter | 1,580 in | 40,13 mm | |
| size - height | 0,510 in | 12.95 mm | |
| Size - inner diameter (hole diameter) | 0,830 in | 21.08 mm | |
| size - diameter of the measuring surface | 1.375 in | 34,93 mm | |
| Mass | 2.82 oz | 80 g | |
| housing material | stainless steel | ||
| sealing | Hermetically sealed | ||
| electrical connection | 10-32-coaxial socket | ||
| connection position | side | ||
| Notes | |||
| [1] | suppose value determined on the basis of solid state Dynamics calculations | ||
| [2] | the lower cutoff frequency and the system noise depend on the used signal conditioning electronics. | ||
| [3] | zero-based balancing line, determined using the method of least squares | ||
| [4] | typically | ||
| Accessories supplied | |||
| 080A82 | grease | -1 | |
| 081A15 | mounting bolts, 5/8-18 x 1,650 ", BeCu | -.1 | |
| 082 B 05 | washer (for models B 205 and 215 B) | -1 | |
| 083 B 05 | mounting sleeve (for the models 205 C and 215 B) | -1 | |
| (M) metric mounting | |||
| equipment | |||
| 080A82 | grease | -1 | |
| M081A15 | Mounting studs, M16 x 1.50 x 1,650 ", BeCu | -1 | |
| 082 B 05 | washer (for models B 205 and 215 B) | -1 | |
| M083B05 | mounting sleeve | -1 | |
| (P) Positive output voltage | |||
| (W) waterproof cable | |||
| wiring | potted integrated cable | ||
| Cable exit | side |
PCB-(M)215B
