PCB-(M)214B
| basic data | |||
| sensitivity (±15%) | 18 pC/lb | 4.047 pC/kN | |
| measuring range (pressure) | ≤ 40,000 lb | ≤ kN 177,92 | |
| Maximum permissible static load (force) | 50,000 lb | 222.4 kN | |
| upper frequency limit | of55,000 Hz | [1] [2] | |
| Linearity error | ≤ 1.5% FS | [3] | |
| conditions | |||
| temperature range | 100 … 400 ° F | 73 … 204 ° C | |
| Temperature coefficient of sensitivity | ≤ 0.03 %/°F | ≤ 0,054 %/°C | |
| Technical | |||
| capacity | ≤2 pF | [4] | |
| insulation resistance | ≥ 1T Ω | ||
| Physical properties | |||
| 8,000 lb | 35,585 kN | preload | |
| stiffness | 29 lb/µin | 5 kN/µm | [4] |
| size ße - diameter | 1.34 in | 34 mm | |
| size - height | 0,470 in | 11.9 mm | |
| Size - inner diameter (hole diameter) | 0,660 in | 16.76 mm | |
| size - diameter of the measuring surface | 1.10 in | 28 mm | |
| Weight | 2 oz | 57 g | |
| housing material | stainless steel | ||
| sealing | hermetically sealed | ||
| Electrical connection | 10-32-coaxial socket | ||
| connection position | side | ||
| notes | |||
| [1] | suppose value determined on the basis of solid state Dynamics calculations | ||
| [2] | the lower cutoff frequency and the system noise is dependent on the used signal conditioning electronics. | ||
| [3] | zero-based balancing line, determined using the method of least squares | ||
| [4] | typically | ||
| Accessories supplied | |||
| 080A82 | grease | -1 | |
| 081A14 | mounting bolts, 1/2 "-20 x 1,400", BeCu | -1 | |
| 082 B 04 | washer (for models 204 C and 214 B) | -1 | |
| 083 B 04 | mounting sleeve (for the models 204 C and 214 B) | -1 | |
| (M) metric mounting | |||
| equipment | |||
| 080A82 | grease | -1 | |
| 082 B 04 | Washer (for models 204 C and 214 B) | -1 | |
| M083B04 | mounting sleeve | -1 | |
| M081A14 | mounting Stud, M14 x 1.25 x 1,400 ", BeCu | -1 | |
| (P) positive output voltage | |||
| (W) waterproof cable connection | |||
| electrical connection | Potted integrated cable | ||
| Cable exit | side |
PCB-(M)214B
