PCB-(M)213B
zoom_out_map

PCB-(M)213B

  • Force measuring washer with charge output,
  • Measuring range 89 kN,
  • Sensitivity 4.05 pC/N,.
  • Upper cutoff frequency?60.000 Hz.
  • 10-32 socket side
basic data
Sensitivity (± 15%) 18 pC / lb 4047 pC / kN
Measurement range (compression force) ?20.000 lb ?88,96 kN
Maximum static force (compression force) 25,000 lb 111.2 kN
Upper limit frequency 60,000 Hz [1] [2]
linearity error ≤1% FS [3]
Operating conditions
temperature range -100 ... 400 ° F -73 ... 204 ° C
Temperature coefficient of sensitivity ?0,05% / ° F ?0,09% / ° C
Technical characteristics
capacity 27 pF [4]
insulation resistance ?1 T?
physical properties
preload 4,000 lb 17.793 kN
rigidity 23 lb / microinches 4 kN / micron [4]
Size - Diameter 1.10 in 27.9 mm
Size - Height 0.430 in 10.9 mm
Size - inner diameter (hole diameter) 0.520 in 13.2 mm
Size - diameter of the measuring surface 0.888 in 22.6 mm
Dimensions 1.3 oz 38 grams
housing material stainless steel
seal hermetically sealed
electrical connection 10-32 coaxial
port location Laterally
Hints
[1] Assuming a value determined on the basis of solid-state dynamic calculations
[2] The lower limit frequency and system noise are dependent on the signal conditioning electronics.
[3] Zero-based line of best fit, determined by the method of least squares
[4] typically,
included supply
080A82 grease -1
081A13 Mounting bolts, 3 / 8-24 x 1.100 ", BeCu -1
082B03 Washer (for models 203B and 213B) -1
083B03 Mounting sleeve (for models 203B and 213B) -1
(M) Metric assembly
included supply
080A82 grease -1
M081A13 Mounting bolts, M10 x 1.00 x 1.100 ", BeCu -1
082B03 Washer (for models 203B and 213B) -1
M083B03 mounting sleeve -1
(P) Positive output polarity
(W) Waterproof cable connection
electrical connection Molded integral cable
cable outlet Laterally
PCB-(M)213B

Specific References

Download

213B_drawing.PDF

Technical drawing

Download (69.19k)

213B_manual.PDF

Operating instructions

Download (1.68M)

213B_specs.PDF

Technical data sheet

Download (22.97k)