PCB-(M)211B
of
| basic data | |||
| sensitivity (±15%) | 18 pC/lb | 4.047 pC/kN | |
| measuring range (pressure) | ? 5,000 lb | ? 22,24 kN | |
| Maximum permissible static load (force) | 8,000 lb | 35,59 kN | |
| upper cut-off frequency | 90,000 Hz | [1] [2] | |
| linearity error | ≤ 1% FS | [3] | |
| conditions | |||
| temperature range | ---100 … 400 ° F | ---73 … 204 ° C | |
| Temperature coefficient of sensitivity | ≤ 0.02 %/°F | ? 0.0?6 %/°C | |
| technical | |||
| capacity | ? 12 pF | [4] | |
| Insulation resistance | ? 1T ? | ||
| (pressure) output polarity | negative | ||
| physical properties | |||
| Preload | 1,000 lb | 4,448 kN | |
| Stiffness | 12 lb/µin | 2.1 kN/µm | [4] |
| size - diameter | 0,650 in | 16.5 mm | |
| Size - height | 0,310 in | 7.88 mm | |
| size - inner diameter (hole diameter) | 0,251 in | 6.37 mm | |
| Size - diameter of the measuring surface | 0.50 in | 12.7 mm | |
| weight | 0.35 oz | 10 grams | |
| parts usematerial | stainless steel | ||
| sealing | hermetically sealed | ||
| electrical connection | 10-32-coaxial socket | ||
| Connection position | side | ||
| notes | |||
| [1] | suppose value determined on the basis of solid state Dynamics calculations | ||
| [2] | the lower cutoff frequency and the system noise depend on the used signal conditioning electronics. | ||
| [3] | zero-based balancing line, determined using the method of least squares | ||
| [4] | typically | ||
| Accessories supplied | |||
| 080A82 | grease | -1 | |
| 081A11 | mounting bolts, 10-32 x 0,730 ", BeCu | -1 | |
| 082 B 01 | washer | -1 | |
| 083 B 01 | Mounting sleeve | -1 | |
| (M) metric mounting | |||
| equipment | |||
| M081A11 | mounting bolt, M5 x 0.8 x 0,730 ", BeCu | -1 | |
| 082 B 01 | washer | -1 | |
| M083B01 | mounting sleeve | -1 | |
| 080A82 | Grease | -1 | |
| (P) positive output voltage | |||
| (W) waterproof cable connection | |||
| electrical connection | Potted integrated cable | ||
| cable exit | side |
PCB-(M)211B
