PCB-(M)209C11
    zoom_out_map

      PCB-(M)209C11

    • Miniature-ICP® power sensor,
    • Measuring range 9.8 N,
    • Sensitivity 495 mV / N,
    • Frequency range 0.5 … 30,000 Hz,
    • 10-32 female connector on the side
    • <td?30.000 Hz

      basic data
      sensitivity (±15%)2.200 mV / lb494.604 mV / kN 
       
      measuring range (pressure)2.2 lb0,00979 kN 
       
      Measuring range (traction)1.0 lb0,00445 kN 
       
      maximum permissible static load (force)11 lb0,0489 kN 
       
      Maximum permissible static load (traction)1.0 lb0,00445 kN 
       
      wide band resolution0.00002 lb RMS0.00009 N RMS[1]
       
      Lower limiting frequency (-5%)0.5 Hz [2]
       
      upper limit frequency [3]
      conditions
      Temperature range-65 … 250 ° F-54 … 121 ° C 
       
      Temperature coefficient of sensitivity≤0,05 %/°F≤0.09 %/°C 
      Technical characteristics
      discharging charging time constant (at room temperature)≥ 1 s  
       
      power18 … 30 V DC  
       
      Constant power supply2 … 20 mA  
       
      output impedance≤100 Ω  
       
      Bias voltage8 … 12 V DC  
       
      Spectral noise (1 Hz)0,00000442 lb / √Hz0,0000197 N / √Hz[1]
       
      spectral noise (10 Hz)0,000000464 lb / √Hz0,00000207 N / √Hz[1]
       
      spectral noise (100 Hz)0,00000013 lb / √Hz0,00000058 N / √Hz[1]
       
      spectral noise (1,000 Hz)0,0000000481 lb / √Hz0,000000215 N / √Hz[1]
       
      (pressure) output polaritypositive  
      physical properties
      Stiffness2 lb/µin0.35 kN/µm[1]
       
      Size - hex0.375 in9.53 mm 
       
      size - height0.83 in21.08 mm 
       
      mass0.29 oz8.2 grams 
       
      Housing materialstainless steel  
       
      Sealinghermetically sealed  
       
      electrical connection10-32-coaxial socket  
       
      Connector positionOn the side  
       
      Mounting thread10-32 tappedNo metric equivalent 
       
      Assembly torque (recommended)15 … 20169 … 226 
      notes
      [1]typically  
       
      [2]calculated using the discharge load time constant  
       
      [3]suppose value determined on the basis of solid state Dynamics calculations  
       
      [4]details: see PCBs Declaration of conformance PS023  
      Accessories supplied
      081A05mounting bolts, 10-32 on 10-32 x 0.27 "long, BeCu (H900), without shoulder-1 
       
      084A38temperature protection (for series 209)-1 
      (M) metric mounting
      equipment   
       
      M081A05mounting bolts 10-32 to M6 x 0.75 x 0.27 "long, BeCu (H900), without shoulder-1 
      (S) negative output polarity
          
      (W) waterproof cable connection
      electrical connectionsealed cable  
       
      Cable exitside  
      PCB-(M)209C11

      Specific References

      Download

      209C11_drawing.PDF

      Technical drawing

      Download (46.57k)

      209C11_manual.PDF

      Operating instructions

      Download (998.03k)

      209C11_specs.PDF

      Technical data sheet

      Download (164.3k)