PCB-(M)207C
zoom_out_map

PCB-(M)207C

  • ICP® power measurement washer,
  • Measuring range 445 kN,
  • Sensitivity 11,2 µV / kN,
  • Frequency range 0.0003 … 35,000 Hz,
  • 10-32 female connector on the side
  • basic data
    sensitivity (±15%) 0.05 mV / lb 11.24 mV / kN  
     
    measuring range (pressure) 100,000 lb 444.8 kN  
     
    Maximum permissible static load (force) 110,000 lb 489,3 kN  
     
    wide band resolution 2.0 lb RMS 8.9 N RMS [1]
     
    Lower limiting frequency (-5%) 0.0003 Hz   [2]
     
    upper frequency limit 35,000 Hz   [4]
     
    linearity error ≤ 1% FS   [3]
    conditions
    temperature range -65 … 250 ° F -54 … 121 ° C  
     
    temperature coefficient Temperature coefficient of sensitivity ≤ 0.02 %/°F ≤0,216 %/°C  
    technical properties
    discharge charge time constant (at room temperature) ≥ 2,000 s    
     
    Supply 20 … 30 V DC    
     
    constant power supply 2… 20 mA    
     
    output impedance ≤100 Ω    
     
    Bias voltage 8 … 14 V DC    
     
    Spectral noise (1 Hz) 0,0524 lb / √Hz 0.23 N / √Hz [1]
     
    spectral noise (10 Hz) 0,0230 lb / √Hz 0.10 N / √Hz [1]
     
    Spectral noise (100 Hz) 0,00854 lb / √Hz 0,0381 N / √Hz [1]
     
    spectral noise (1,000 Hz) 0,00214 lb / √Hz 0,00955 N / √Hz [1]
     
    (Pressure) output polarity positive    
    physical properties
    preload 33.750 lb 150,13 kN  
     
    Stiffness 131 lb/µin 23 kN/µm [1]
     
    Size - diameter 2,950 in 74.9 mm  
     
    size - height 0,670 in 17,02 mm  
     
    Gr öße - inner diameter (hole diameter) 1.610 in 40 mm  
     
    Size - diameter of the measuring surface 2,660 in 67.6 mm  
     
    mass 11,57 oz 328 grams  
     
    housing material Stainless steel    
     
    sealing hermetically sealed    
     
    electrical connection 10-32-coaxial socket    
     
    Connection position side    
    notes
    [1] typically    
     
    [2] based on the Calculated discharge charge time constant    
     
    [3] zero-based balancing line, determined using the method of least squares    
     
    [4] Accepted value determined on the basis of solid state Dynamics calculations    
     
    [5] details: see PCBs Declaration of conformance PS023    
    included Accessories
    080A82 grease -1  
     
    081A17 mounting bolts, 1 1/8 to 12 x 2,280 ", BeCu -1  
     
    082 B 07 Plain washer (for the 207C models and 217B) -1  
     
    083 B 07 mounting sleeve (for the 207 C models and 217 B) -1  
    (M) metric mounting
    equipment      
     
    M081A17 mounting bolts, M30 x 2.00 x 2,280 ", BeCu -1  
     
    M083B07 mounting sleeve -1  
    (N) ) Negative output polarity
           
    (W) waterproof cable connection
    electrical connection sealed cable connection    
     
    Cable exit side    
    PCB-(M)207C

    Specific References

    Download

    207C_drawing.PDF

    Technical drawing

    Download (76.77k)

    207C_manual.PDF

    Operating instructions

    Download (1M)

    207C_specs.PDF

    Technical data sheet

    Download (163.58k)