PCB-(M)206C
zoom_out_map

PCB-(M)206C

  • ICP® power measurement washer,
  • Measuring range 356 kN,
  • Sensitivity 13,5 mV / kN,
  • Frequency range 0.0003 … 40,000 Hz,
  • 10-32 female connector on the side
  •  

    basic data
    sensitivity (±15%) 0.06 mV / lb 13,5 mV / kN  
     
    measuring range (pressure) 80,000 lb 355,86 kN  
     
    Maximum permissible static load (force) 90,000 lb 400,34 kN  
     
    wide band resolution 1.8 lb RMS 8.0 N RMS [1]
     
    Lower limiting frequency (-5%) 0.0003 Hz   [2]
     
    upper frequency limit 40,000 Hz   [4]
     
    linearity error ≤ 1% FS   [3]
    conditions
    temperature range -65 … 250 ° F -54 … 121 ° C  
     
    temperature coefficient Temperature coefficient of sensitivity ≤0,01 %/°F ≤0,198 %/°C  
    technical properties
    discharge charge time constant (at room temperature) ≥ 2,000 s    
     
    Supply 20 … 30 V DC    
     
    Konstantstromversorgung 2 … 20 mA    
     
    output impedance ≤100 Ω    
     
    Bias voltage 8 … 14 V DC    
     
    Spectral noise (1 Hz) 0.16 lb / √Hz 0.71 N / √Hz [1]
     
    spectral noise (10 Hz) 0.050 lb / √Hz 0.22 N / √Hz [1]
     
    spectral noise (100 Hz) 0.014 lb / √Hz 0.0625 N / √Hz [1]
     
    spectral noise (1,000 Hz) 0,0036 lb / √Hz 0,0160 N / √Hz [1]
     
    (pressure) output polarity positive    
    physical properties
    preload 16,000 lb kN 71,172  
     
    stiffness 74 lb/µin 13 kN/µm [1]
     
    size - diameter 2.05 in 52.1 mm  
     
    Size - height 0,590 in 15 mm  
     
    size - inner diameter (hole diameter) 1,025 in 26 mm  
     
    Size - diameter of the measuring surface 1,750 in 44.4 mm  
     
    dimensions 5.5 oz 155 grams  
     
    housing material Stainless steel    
     
    sealing hermetically sealed    
     
    electrical connection 10-32-coaxial socket    
     
    Connection position side    
    notes
    [1] typically    
     
    [2] based on the Calculated discharge charge time constant    
     
    [3] zero-based balancing line, determined using the method of least squares    
     
    [4] Accepted value determined on the basis of solid state Dynamics calculations    
     
    [5] details: see PCBs Declaration of conformance PS023    
    included Accessories
    080A82 grease -1  
     
    081A16 mounting bolts, 7/8-14 x 1,900 ", BeCu -1  
     
    082 B 06 Washer -1  
     
    083 B 06 mounting sleeve (for the models 206 C and 216 B) -1  
    (M) metric mounting
    equipment      
     
    M081A16 mounting bolts, M22 x 2.00 x 1,900 ", BeCu -1  
     
    M083B06 mounting sleeve -1  
    (S) negative output polarity
           
    (W) waterproof cable connection
    Electrical connection sealed cable connection    
     
    cable exit side    
    PCB-(M)206C

    Specific References

    Download

    206C_drawing.PDF

    Technical drawing

    Download (73.01k)

    206C_manual.PDF

    Operating instructions

    Download (924.47k)

    206C_specs.PDF

    Technical data sheet

    Download (55.79k)