PCB-(M)205C
zoom_out_map

PCB-(M)205C

  • ICP® power measurement washer,
  • Measuring range 267 kN,
  • Sensitivity 18 mV / kN,
  • Frequency range 0.0003 … 50,000 Hz,
  • 10-32 female connector on the side
  • basic data
    sensitivity (±15%) 0.08 mV / lb 17.98 mV / kN  
     
    measuring range (pressure) 60,000 lb 266.9 kN  
     
    Maximum permissible static load (force) 70,000 lb 311.4 kN  
     
    wide band resolution 1 lb RMS 4.45 N RMS [1]
     
    Lower limiting frequency 0.0003 Hz   [2]
     
    upper frequency limit 50,000 Hz   [4]
     
    linearity error ≤ 1.5% FS   [3]
    conditions
    temperature range -65 … 250 ° F -54 … 121 ° C  
     
    Temperature coefficient of sensitivity ≤ 0.10 %/°F ≤0.18 %/°C  
    technical properties
    discharge charge time constant (at room temperature) ≥ 2,000 s    
     
    Supply voltage 20 … 30 V DC    
     
    constant power supply 2 … 20 mA    
     
    output impedance ≤100 Ω    
     
    Bias voltage 8 … 14 V DC    
     
    Spectral noise (1 Hz) 0,0981 lb / √Hz 0.44 N / √Hz [1]
     
    spectral noise (10 Hz) 0,0306 lb / √Hz 0.14 N / √Hz [1]
     
    Spectral noise (100 Hz) 0,00709 lb / √Hz 0.032 N / √Hz [1]
     
    spectral noise (1,000 Hz) 0,00192 lb / √Hz 0,00857 N / √Hz [1]
     
    (Pressure) output polarity positive    
    physical properties
    12,000 lb 53,379 kN preload  
     
    Stiffness 40 lb/µin 7 kN/µm [1]
     
    Size - diameter 1,580 in 40,13 mm  
     
    size - height 0,510 in 12.95 mm  
     
    Gr öße - inner diameter (hole diameter) 0,830 in 21.08 mm  
     
    Size - diameter of the measuring surface 1.375 in 34,93 mm  
     
    Dimensions 2.7 oz 77 grams  
     
    housing material stainless steel    
     
    sealing Hermetically sealed    
     
    electrical connection 10-32-coaxial socket    
     
    connection position side    
    Notes
    [1] typically    
     
    [2] calculated on the basis of discharging charging time constant    
     
    [3] zero-based balancing line, determined using the method of least squares    
     
    [4] suppose value determined on the basis of solid state Dynamics calculations    
     
    [5] details: see PCBs Declaration of conformance PS023    
    Equipment
    080A82 grease -1  
     
    081A15 mounting bolts, 5/8-18 x 1,650 ", BeCu -1  
     
    082 B 05 washer (for models B 205 and 215 B) -1  
     
    083 B 05 mounting sleeve (for the models 205 C and 215 B) -1  
    (M) metric mounting
    equipment      
     
    M081A15 mounting studs, M16 x 1.50 x 1,650 ", BeCu -1  
     
    M083B05 mounting sleeve -1  
    (N) ) Negative output polarity
           
    (W) waterproof cable connection
    electrical connection sealed cable connection    
     
    Cable exit side    
    PCB-(M)205C

    Specific References

    Download

    205C_drawing.PDF

    Technical drawing

    Download (77.74k)

    205C_manual.PDF

    Operating instructions

    Download (940.45k)

    205C_specs.PDF

    Technical data sheet

    Download (75.83k)