PCB-(M)204C
zoom_out_map

PCB-(M)204C

  • ICP® power measurement washer,
  • Measuring range 178 kN,
  • Sensitivity 27 mV / kN,
  • Frequency range 0.0003 … 55,000 Hz,
  • 10-32 female connector on the side
  •  

    basic data
    sensitivity (±15%)

    0.12 mV / lb

    27 mV / kN  
     
    measuring range (pressure) 40,000 lb 177.92 kN  
     
    Maximum permissible static load (force) 50,000 lb 222.4 kN  
     
    wide band resolution 0.80 lb RMS 3.6 N RMS [1]
     
    Lower limiting frequency (-5%) 0.0003 Hz   [2]
     
    upper frequency limit 55,000 Hz   [4]
     
    linearity error ≤ 1.5% FS   [3]
    conditions
    temperature range -65 … 250 ° F -54 … 121 ° C  
     
    Temperature coefficient of sensitivity ≤ 0.08 %/°F ≤ 0.04 %/°C  
    technical properties
    discharge charge time constant (at room temperature) ≥ 2,000 s    
     
    Supply 20 … 30 V DC    
     
    constant power supply 2 … 20 mA    
     
    output impedance ≤100 Ω    
     
    Bias voltage 8 … 14 V DC    
     
    Spectral noise (1 Hz) 0.088 lb / √Hz 0.39 N / √Hz [1]
     
    spectral noise (10 Hz) 0.025 lb / √Hz 0.11 N / √Hz [1]
     
    spectral noise (100 Hz) 0,0060 lb / √Hz 0,0266 N / √Hz [1]
     
    spectral noise (1,000 Hz) 0.0016 lb / √Hz 0,00719 N / √Hz [1]
     
    (pressure) output polarity positive    
    physical properties
    preload 8,000 lb 35,585 kN  
     
    stiffness 29 lb/µin 5 kN/µm [1]
     
    size - diameter 1.34 in 34 mm  
     
    Size - height 0.47 in 12 mm  
     
    size - inner diameter (hole diameter) 0,660 in 16.76 mm  
     
    Size - diameter of the measuring surface 1.10 in 28 mm  
     
    mass 2.0 oz 57 g  
     
    housing material Stainless steel    
     
    sealing hermetically sealed    
     
    electrical connection 10-32-coaxial socket    
     
    Connection position side    
    notes
    [1] typically    
     
    [2] based on the Calculated discharge charge time constant    
     
    [3] zero-based balancing line, determined using the method of least squares    
     
    [4] Accepted value determined on the basis of solid state Dynamics calculations    
     
    [5] details: see PCBs Declaration of conformance PS023    
    included Accessories
    080A82 grease -1  
     
    081A14 mounting bolts, 1/2 "-20 x 1,400", BeCu -1  
     
    082 B 04 Washer (for models 204 C and 214 B) -1  
     
    083 B 04 mounting sleeve (for the models 204 C and 214 B) -1  
    (M) metric mounting
    equipment      
     
    M081A14 mounting Stud, M14 x 1.25 x 1,400 ", BeCu -1  
     
    M083B04 mounting sleeve -1  
    (N) negative Output polarity
           
    (W) waterproof cable connection
    electrical connection sealed cable connection    
     
    Cable exit side    
    PCB-(M)204C

    Specific References

    Download

    204C_drawing.PDF

    Technical drawing

    Download (70.3k)

    204C_manual.PDF

    Operating instructions

    Download (932.91k)

    204C_specs.PDF

    Technical data sheet

    Download (75.74k)