PCB-(M)203B
zoom_out_map

PCB-(M)203B

  • ICP® power measurement washer,
  • Measuring range 89 kN,
  • Sensitivity 56 mV / kN,
  • Frequency range 0.0003 … 60,000 Hz,
  • 10-32 female connector on the side
  • of

    basic data
    sensitivity (±15%) 0.25 mV / lb 56.2 mV / kN  
     
    measuring range (pressure) 20,000 lb 88,96 kN  
     
    Maximum permissible static load (force) 25,000 lb 111.2 kN  
     
    wide band resolution 0.4 lb RMS 1.78 N RMS [1]
     
    Lower limiting frequency (-5%) 0.0003 Hz   [2]
     
    upper frequency limit 60,000 Hz   [4]
     
    linearity error ≤ 1% FS   [3]
    conditions
    temperature range -65 … 250 ° F -54 … 121 ° C  
     
    temperature coefficient Temperature coefficient of sensitivity ≤0,01 %/°F ≤0,198 %/°C  
    technical properties
    discharge charge time constant (at room temperature) ≥ 2,000 s    
     
    Supply 20 … 30 V DC    
     
    constant power supply 2 … 20 mA    
     
    output impedance ≤100 Ω    
     
    Bias voltage 8 … 14 V DC    
     
    (Pressure) output polarity positive    
    physical properties
    4,000 lb 17,793 kN preload  
     
    Stiffness 23 lb/µin 4 kN/µm [1]
     
    size - diameter 1.10 in 27.9 mm  
     
    Gr öße - height 0,430 in 10.9 mm  
     
    size - inner diameter (hole diameter) 0,520 in 13.2 mm  
     
    size ße - diameter of the measuring surface 0,888 in 22.6 mm  
     
    weight 1.3 oz 38 g  
     
    housing material stainless steel    
     
    Sealing hermetically sealed    
     
    electrical connection 10-32-coaxial socket    
     
    Connecting position side    
    Notes
    [1] typically    
     
    [2] onBase of discharge charge time constant calculated    
     
    [3] zero-based balancing line, determined using the method of least squares    
     
    [4] Accepted value determined on the basis of solid state Dynamics calculations    
     
    [5] details: see PCBs Declaration of conformance PS023    
    included Accessories
    080A82 grease -1  
     
    081A13 mounting bolts, 3/8-24 x 1,100, BeCu -1  
     
    082 B 03 Plain washer (for the models 203B and 213B) -1  
     
    083 B 03 mounting sleeve (for the models 203 B and 213 B) -1  
    (M) metric mounting
    Accessories      
     
    M081A13 mounting bolt, M10 x 1.00 x 1,100, BeCu -1  
     
    M083B03 mounting sleeve -1  
    (N) negative output polarity
           
    (W) waterproof cable connection
    electrical connection sealed cable connection    
     
    Cable outlet On the side    
    PCB-(M)203B

    Specific References

    Download

    203B_drawing.PDF

    Technical drawing

    Download (70.38k)

    203B_manual.PDF

    Operating instructions

    Download (912.34k)

    203B_specs.PDF

    Technical data sheet

    Download (50.88k)