PCB-(M)202B
zoom_out_map

PCB-(M)202B

  • ICP® power measurement washer,
  • Measuring range 44.5 kN,
  • Sensitivity 112 mV / kN,
  • Frequency range 0.0003 … 60,000 Hz,
  • 10-32 female connector on the side
  • basic data
    sensitivity (±15%) 0.50 mV / lb 112.4 mV / kN
    measuring range (pressure) 10,000 lb 44.48 kN
    Maximum permissible static load (force) 15,000 lb 66,72 kN
    wide band resolution 0.20 lb RMS 0.890 N RMS [1]
    lower limiting frequency (-5%) 0.0003 Hz [2]
    upper frequency limit 60,000 Hz [4]
    linearity ≤ 1% FS [3]
    conditions
    temperature range -65 … 250 ° F -54 … 121 ° C
    Temperature coefficient of sensitivity ≤ 0.03 %/°F ≤ 0,054 %/°C
    technical
    Discharge charge time constant (at room temperature) ≥ 2,000 s
    supply 20 … 30 V DC
    Constant power supply 2… 20 mA
    output impedance ≤ 100 Ω
    Bias voltage 8 … 14 V DC
    (Pressure) output polarity positive
    physical properties
    preload 2,000 lb 8,896 kN
    Stiffness 16 lb/µin 2,8 kN/µm [1]
    size - diameter 0,870 in 22.1 mm
    Size - height 0,390 in 9.91 mm
    size - inner diameter (hole diameter) 0,413 in 10,49 mm
    Size - diameter of the measuring surface 0.665 in 16.89 mm
    Mass 0.67 oz 19 grams
    housing material stainless steel
    sealing Hermetically sealed
    electrical connection 10-32-coaxial socket
    Connector position
    (W) waterproof cable connection
    Electrical connectionSealed cable connection
    Cable outletOn the side
    PCB-(M)202B

    Specific References

    Download

    202B_drawing.PDF

    Technical drawing

    Download (65.37k)

    202B_manual.PDF

    Operating instructions

    Download (908.76k)

    202B_specs.PDF

    Technical data sheet

    Download (52.32k)