PCB-201B04
| basic data | |||
| sensitivity (±15%) | 5 mV / lb | 1,124 mV / kN | |
| measuring range (pressure) | 1,000 lb | 4,448 kN | |
| Maximum permissible static load (force) | 6,000 lb | 26,69 kN | |
| wide band resolution | 0,02 lb RMS | 0,08896 N RMS | [3] |
| Lower limiting frequency (-5%) | 0.001 Hz | [2] | |
| upper cut-off frequency | 90,000 Hz | [4] | |
| linearity error | ≤ 1% FS | [1] | |
| conditions | |||
| temperature range | -65 … 250 ° F | -54 … 121 ° C | |
| temperature coefficient Temperature coefficient of sensitivity | ≤ 0.03 %/°F | ≤ 0,054 %/°C | |
| technical properties | |||
| discharge charge time constant (at room temperature) | ≥700 s | ||
| Supply | 20 … 30 V DC | ||
| constant power supply | On the side | ||
| Notes | |||
| [1] | zero-based balancing line, determined using the method of least squares | ||
| [2] | on the basis of the Calculated discharge charge time constant | ||
| [3] | typically | ||
| [4] | assume that value determined on the basis of Festkö body dynamics calculations | ||
| [5] | details: see PCBs Declaration of conformance PS023 | ||
| equipment | |||
| 080A82 | Grease | -1 | |
| 081A11 | mounting bolts, 10-32 x 0,730 ", BeCu | -1 | |
| 082 B 01 | washer | -1 | |
| 083 B 01 | Mounting sleeve | -1 | |
| M081A11 | mounting bolt, M5 x 0.8 x 0,730 ", BeCu | -1 | |
| M083B01 | mounting sleeve | -1 | |
| (S) negative output polarity | |||
| (W) waterproof cable | |||
| wiring | sealed cable connection | ||
| Cable outlet | On the side |
PCB-201B04
