PCB-(M)625B00
zoom_out_map

PCB-(M)625B00

  • Industrial ICP® vibration sensor,
  • With through hole,
  • Measuring range 500 g
  • Sensitivity 10 mV / g,
  • Frequency range 0.2 … 10,500 Hz,
  • Frequency response calibration,
  • 2-pin female connector on the side
  •  

    basic data
    sensitivity (±5%) 10 mV / g 1.0 mV/(m/s²) [5]
     
    measuring range ≤500 Ω ±4. 905 m/s 2  
     
    Frequency range (±5%) 30 … 390,000 cpm 0.5 … 6,500 Hz [1]
     
    frequency range (± 10%) 22 … 450,000 cpm 0.37 … 7,500 Hz  
     
    frequency range (± 3 dB) 12 … cpm 630,000 0.2 … 10,500 Hz  
     
    resonance frequency 1,500 kcpm 25,000 Hz [4]
     
    wide band resolution 350 µg 3.434 µm / s ² [4]
     
    linearity ≤1%   [2]
     
    Transverse acceleration sensitivity ≤5%    
    conditions of use
    Overload limit (shock) 5,000 g PK 49,050 m/s² pk  
     
    temperature range -65 … 250 ° F -54 … 121 ° C  
     
    Protection class IP68    
    technical Properties
    settling time (on bias voltage ± 1%) ≤ 8s    
     
    discharging charging time constant ≥ 1.0 s    
     
    Supply voltage 18 … 28 V DC    
     
    constant power supply 2 … 20 mA    
     
    Output impedance < 100Ω    
     
    Bias voltage 8 … 12 V DC    
     
    spectral noise (10 Hz) 15 µg / √Hz 147 ( µm / s ²) / √ Hz [4]
     
    spectral noise (100 Hz) 7 µg / √Hz 69 (µm / s ²) / √Hz [4]
     
    spectral noise (1,000 Hz) 4 µg / √Hz 39 (µm / s ²) / √Hz [4]
     
    electrical protection RFI/ESD    
     
    electrical insulation (housing ) >100 MΩ    
    physical properties
    size - diameter 1.38 in 35.1 mm  
     
    Size - height 1.13 in 28.7 mm  
     
    dimensions 5.1 oz 145 grams  
     
    mounting hole    
     
    Mounting thread 1/4"-28 no equivalent [3]
     
    Assembly torque 2 … 5 ft-lb 2.7 … 6.8 Nm  
     
    Sensor element ceramic    
     
    geometry of the sensor element shear principle    
     
    housing material Stainless steel    
     
    sealing hermetically sealed welded    
     
    electrical connection 2-pin connector (MIL-C-5015)    
     
    Connection position side    
    notes
    [1] the upper cut-off frequency tolerance: ±10%    
     
    [2] zero-based balancing line, determined using the method of least squares    
     
    [3] mounting with M6 screw possible    
     
    [4] typically    
     
    [5] conversion factor1 g = 9.81 m/s²    
    Accessories
    080 B 45 temperature protection -1  
     
    081A73 mounting screw 1/4 "-28 x 1.34 " -1  
     
    ICS-1 frequency response for uniaxial sensors from 10 Hz up to the upper 5% frequency -1  
    (M) metric mounting
    " Accessories      
     
    M081A73 metric mounting bolt with M6 thread -1  
    (TO) temperature output
    Temperature range 36 … 250 ° F 2 … 121 ° C  
     
    transcription factor 5.56 mV / ° F
    (zero point at 32 °F)
    10 mV / ° C  
     
    Electrical connection 3-Pin    
     
    pin assigNment (PIN A) acceleration output    
     
    pin assigNment (PIN B) Mass    
     
    Pin assigNment (PIN C) temperature output    
    (LB) low bias voltage
    Bias voltage 6 … 8 V DC    
     
    Power 12 … 28 V DC    
     
    measuring range ±350 g ±3. 434 m/s²  
    PCB-(M)625B00

    Specific References

    Download

    625B00_drawing.PDF

    Technical drawing

    Download (380.36k)

    625B00_manual.PDF

    Operating instructions

    Download (1.17M)

    625B00_specs.PDF

    Technical data sheet

    Download (62.03k)