PCB-(M)608A11
zoom_out_map

PCB-(M)608A11

  • Industrial ICP® vibration sensor,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.5 … 10,000 Hz,
  • One-point calibration at 100 Hz,
  • Integrated cable, length 3 m,
    ending on cut end
  • basic data
    sensitivity (±15%) 100 mV/g 10.2 mV/(m/s²) [5]
    measuring range ±50 g ±490 m / s²
    Frequency range (± 3 dB) 30 … 600,000 cpm 0.5 … 10,000 Hz
    resonance frequency 1,320 kcpm 22,000 Hz [1]
    Wide band resolution 350 µg 3.434 µm / s ² [1]
    linearity ≤1% [2]
    Lateral acceleration sensitivity ≤ 7%
    Conditions of use
    Overload limit (shock) 5,000 g pk 49,050 m/s² pk
    Temperature range -65 … 250 ° F -54 … 121 ° C
    protection class IP68
    technical characteristics
    Settling time (on bias voltage ± 1%) ≤ 2.0 s
    discharging charging time constant ≥ 0.3 s
    Power 18 … 28 V DC
    constant power supply 2 … 20 mA
    Output impedance < 150 Ω
    Bias voltage 8 … 12 V DC
    Spectral noise (10 Hz) 8 µg / √ Hz 78.5 (µm / s ²) / √ Hz [1]
    spectral noise (100 Hz) 5 µg / √ Hz 49.1 (µm / s ²) / √ Hz [1]
    spectral noise (1,000 Hz) 4 µg / √ Hz 39.2 (µm / s ²) / √ Hz [1]
    electric Insulation (housing) ≥ 100 MΩ
    physical properties
    size - Allen 9/16 in 14 mm
    size ße - height 2.5 in 64 mm
    weight (with cord) 3.5 oz 99.3 grams
    fixing mounting bolt
    Mounting thread 1/4 "-28 threaded [3]
    Assembly torque 2 … 5 ft-lb 2.7 … 6.8 Nm
    sensor element " Ceramic
    geometry of the sensor element shear principle
    housing material stainless steel
    Sealing shed
    electrical connection potted integrated cable
    cable outlet top
    Cable length 10 ft 3 m
    cable type polyurethane [4]
    notes
    [1 ] Typically
    [2] zero-based balancing line, determined using the method of least squares
    [3] No Ä equivalent in SI units
    [4] Screened two-wire cable with twisted wire
    [5] conversion factor 1 g = 9.81 m/s²
    [6] details: see PCBs Declaration of conformance PS023 and PS060
    Equipment
    081A40 mounting bolts with 1/4 "-28 thread -1
    ICS-2 single point calibration at 100 Hz (Rü" ckführbar on NIST) -1
    (M) metric mounting
    equipment
    M081A61 metric mounting bolts with M6-thread -1
    (TO) temperature output
    temperature range 36 … 250 ° F 2 … 121 ° C
    transcription factor 5.56 mV / ° F
    (zero point at 32 °F)
    10 mV / ° C
    Electrical connection potted integrated cable
    connections (red wire) acceleration output
    (Black wire) pin assigNment mass
    pin assigNment (white wire) temperature output
    (EX) with ATEX approval
    Admission f &kitchen r hazardous atmospheres CL I, div 2, groups A, B, C, D
    ExnL IIC T4, AExnA IIC T4
    approval for use in potentially explosive atmospheres EEx nL IIC T4, 40 ° C ≤ Ta ≤ 121 ° C, II 3 G
    approval for use in potentially explosive atmospheres EEx nL IIC T4,-40 ° C ≤ Ta ≤ 121 ° C, II 1 G
    Approved for use in potentially explosive atmospheres CL I, div I, groups A, B, C, D CL
    II, div I, groups E, F, G Cl
    III, div I
    approval for hazardous Atmospheres ExIA IIC T4, AExia IIC, T4
    (LB) low bias voltage
    Bias stress 4.8 … 6.5 V DC
    Power 12 … 28 V DC
    measuring range ± 10 g ±98 m / s ²
    PCB-(M)608A11

    Specific References

    Download

    608A11_drawing.PDF

    Technical drawing

    Download (58.07k)

    608A11_manual.PDF

    Operating instructions

    Download (908.02k)

    608A11_specs.PDF

    Technical data sheet

    Download (98.45k)