PCB-(M)606B11
zoom_out_map

PCB-(M)606B11

  • Industrial ICP® vibration sensor,
  • With through hole,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.5 … 10,000 Hz,
  • One-point calibration at 100 Hz,
  • Integrated cable, length 3 m,
    ending on cut end
  • basic data
    sensitivity (±20%) 100 mV/g 10.2 mV/(m/s²) [6]
    measuring range ±50 g ±490 m / s²
    Frequency range (± 3 dB) 30 … 600,000 cpm 0.5 … 10,000 Hz [4]
    resonance frequency 1,500 kcpm 25,000 Hz [1]
    Wide band resolution 350 µg 3.434 µm / s ² [1]
    linearity ≤1% [2]
    Transverse acceleration sensitivity ≤ 7%
    conditions of use
    Overload limit (shock) 5,000 g pk 49,050 m/s² pk
    temperature range -65 … 250 ° F -54 … 121 ° C
    Type of protection IP68
    Technical characteristics
    settling time (on bias voltage ± 1%) ≤ 2.0 s
    discharging charging time constant ≥ 0.3 s
    Power 18 … 28 V DC
    constant power supply 2 … 20 mA
    Output impedance < 150 Ω
    Bias voltage 8 … 12 V DC
    Spectral noise (10 Hz) 8 µg / √ Hz 78.5 (µm / s ²) / √ Hz [1]
    spectral noise (100 Hz) 5 µg / √ Hz 49.1 (µm / s ²) / √ Hz [1]
    Spectral noise (1,000 Hz) 4 µg / √ Hz 39.2 (µm / s ²) / √ Hz [1]
    electrical insulation (housing) ≥ 100 MΩ
    Physical properties
    size - diameter 1.38 in 35.1 mm
    size - height 1.00 in 25.4 mm
    Dimensions (without cable) 4.4 oz 124 grams
    mounting hole
    Mounting thread 1/4"-28 no equivalent [3]
    Assembly torque 2 … 5 ft-lb 2.7 … 6.8 Nm
    " Sensor element ceramic
    geometry of the sensor element shear principle
    housing material stainless steel
    Sealing hermetically sealed welded
    electrical connection potted integrated cable
    Cable exit side
    cable length 10 ft 3.0 m
    cable type polyurethane [5]
    Notes
    [1] typically
    [2] zero-based balancing line, determined using the method of least squares
    [3] mounting with M6 screw possible
    [4] the upper cut-off frequency tolerance: ±10%
    [5] two-wire shielded cable withtwisted wire
    [6] conversion factor 1 g = 9.81 m/s²
    [7] details: see PCBs Declaration of conformance PS023 and < a href = "".. "/ produkte_skript/downloads/ce/ps060.pdf" "class ="blue"> PS060
    equipment
    081A68 mounting screw 1/4"-28 x 0.9" -1
    ICS-2 single point calibration at 100 Hz (traceable to NIST) -1
    (M) metric mounting
    equipment
    M081A68 metric mounting bolt with M6 thread -1
    (EX) with ATEX approval
    approval for use in potentially explosive atmospheres ExIA IIC T4,. AExia IIC, T4
    approval for use in potentially explosive atmospheres EEx nL IIC T4,-40 ° C ≤ Ta ≤ 121 ° C, II 3 G
    admission f for potentially explosive atmospheres EEx nL IIC T4,-40 ° C ≤ Ta ≤ 121 ° C, II 1 G
    approval for use in potentially explosive atmospheres CL I, divI, groups A, B, C, D CL
    II, div I, groups E, F, G Cl
    III, div I
    approval for use in potentially explosive atmospheres CL I, div 2, groups A, B, C, D
    ExnL IIC T4, AExnA IIC T4
    PCB-(M)606B11

    Specific References

    Download

    606B11_drawing.PDF

    Technical drawing

    Download (56.22k)

    606B11_manual.PDF

    Operating instructions

    Download (894.96k)

    606B11_specs.PDF

    Technical data sheet

    Download (92.52k)