PCB-(M)603C00
| basic data | ||||
| sensitivity (±20%) | 10 mV / g | 1.02 mV/(m/s²) | [5] | |
| measuring range | ≤500 Ω | ±4. 905 m/s 2 | ||
| Frequency range (± 3 dB) | 30 … 600,000 cpm | 0.5 … 10,000 Hz | [4] | |
| resonance frequency | 1,500 kcpm | 25,000 Hz | [2] | |
| Wide band resolution | 2,000 µg | 19.620 µm / s ² | [2] | |
| linearity | ≤1% | [1] | ||
| Transverse acceleration sensitivity | ≤ 7% | |||
| conditions of use | ||||
| Overload limit (shock) | 5,000 g pk | 49,050 m/s² pk | ||
| temperature range | -65 … 250 ° F | -54 … 121 ° C | ||
| Type of protection | IP68 | |||
| Technical characteristics | ||||
| settling time (on bias voltage ± 1%) | ≤ 3.0 s | |||
| discharging charging time constant | ≥0.4 s | 0.4 s|||
| Power | 18 … 28 V DC | |||
| constant power supply | 2 … 20 mA | |||
| Output impedance | < 150 Ω | |||
| Bias voltage | 8 … 12 V DC | |||
| Spectral noise (10 Hz) | 85 µg / √Hz | 834 (µm / s ²) / √Hz | [2] | |
| spectral noise (100 Hz) | 20 µg / √Hz | 196 (µm / s ²) / √Hz | [2] | |
| spectral noise (1,000 Hz) | 5 µg / √Hz | 49,1 (µm / s ²) / √Hz | [2] | |
| Electrical insulation (housing) | >100 MΩ | |||
| physical properties | ||||
| size - Allen | 11/16 in | 18 mm | ||
| Size - height | 1.65 in | 42.2 mm | ||
| Size | 1.8 oz | 51 grams | ||
| mounting thread | 1/4 "-28 threaded | no equivalent | [3] | |
| Assembly torque | 2 … 5 ft-lb | 2.7 … 6.8 Nm | ||
| sensor element | ceramic | |||
| geometry of the Sensor element | shear principle | |||
| housing material | stainless steel | |||
| sealing | hermetically sealed welded | |||
| Electrical connection | 2-pin connector (MIL-C-5015) | |||
| connection position | above | |||
| notes | ||||
| [1] | zero-based balancing line, determined using the method of least squares | |||
| [2] | typically | |||
| [3] | No equivalent in SI units | |||
| [4] | the upper cut-off frequency tolerance: ±10% | |||
| [5] | conversion factor 1 g = 9,81 m / | |||
| [6] | details: see PCBs Declaration of conformance PS023 and PS060 | |||
| 081A40 | mounting bolts with 1/4 "-28 thread | -1 | ||
| (M) metric mounting | ||||
| equipment | ||||
| M081A61 | metric mounting bolts with M6 thread | -1 | ||
| (EX) with ATEX approval | ||||
| Approval for use in potentially explosive atmospheres | CL I, div 2, groups A, B, C, D ExnL IIC T4, AExnA IIC T4 | |||
| approval for use in potentially explosive atmospheres | EEx ia IIC T4,-40 ° C≤Ta≤121 ° C, II 1 G | |||
| Approval for use in potentially explosive atmospheres | CL I, div I, groups A, B, C, D CL II, div I, groups E, F, G Cl III, div I | |||
| registration for use in potentially explosive atmospheres | ExIA IIC T4, AExia IIC, T4 | |||
| approval for use in potentially explosive atmospheres | EEx nL IIC T4,-40 ° C≤Ta≤121 ° C,. II 3 G |
PCB-(M)603C00
