PCB-(M)602D61
zoom_out_map

PCB-(M)602D61

  • Industrial ICP® vibration sensor,
  • With through hole,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.5 … 8,000 Hz,
  • One-point calibration at 100 Hz,
  • Integrated armored cable, length 3 m,
    ending on cut end
  • " " Pinout
    basic data
    sensitivity (±10%) 100 mV/g 10.2 mV/(m/s²) [4]
    measuring range ±50 g ±490 m / s²
    Frequency range (± 3 dB) 30 … 480,000 cpm 0.5 … 8,000 Hz [2]
    resonance frequency 1,500 kcpm 25,000 Hz [1]
    Wide band resolution 350 µg 3.434 µm / s ² [1]
    linearity ≤1% [6]
    Transverse acceleration sensitivity ≤ 7%
    conditions of use
    Overload limit (shock) 5,000 g pk 49,050 m/s² pk
    temperature range -65 … 250 ° F -54 … 121 ° C
    Type of protection IP68
    Technical characteristics
    settling time (on bias voltage ± 1%) ≤ 2.0 s
    discharging charging time constant ≥ 0.3 s
    Power 18 … 28 V DC
    constant power supply 2 … 20 mA
    Output impedance < 150 Ω
    Bias voltage 8 … 12 V DC
    Spectral noise (10 Hz) 8.0 µg / √ Hz 78.5 (µm / s ²) / √ Hz [1]
    spectral noise (100 Hz) 5 µg / √ Hz 49.1 (µm / s ²) / √ Hz [1]
    Spectral noise (1,000 Hz) 4 µg / √ Hz 39.2 (µm / s ²) / √ Hz [1]
    electrical insulation (housing) ≥ 100 MΩ
    Physical properties
    size - length 4.0 in 102 mm
    size - width 0.74 at 18.8 mm
    Size - height 0,845 in 21.5 mm
    dimensions (without cable) 2.61 oz 74 grams
    Mounting thread 1/4"-28 No metric equivalent [5]
    Assembly torque 2 … 5 ft-lb 2.7 … 6.8 Nm
    Sensor element ceramic
    geometry of the sensor element shear principle
    housing material stainless steel
    Sealing hermetically sealed welded
    electrical connection integrated armoured cable
    Cable exit side
    cable length 10 ft 3.0 m
    cable type polyurethane [3]
    Notes
    [1] typically
    [2] the upper cut-off frequency tolerance: ±10%
    [3] two-core cable with stainless steel reinforcement
    [4] Conversion factor 1 g = 9.81 m/s²
    [5] mounting with M6 screw possible
    [6] zero-based balancing line, determined using the method of least squares
    [7] details: see PCBs Declaration of conformance PS023 and < a href =" ".. "/ produkte_skript/downloads/ce/ps060.pdf" "class ="blue"> PS060
    equipment
    081A97 passage screw 1/4" 28 -1
    ICS-2 single point calibration at 100 Hz (traceable to NIST) -1
    (M) metric mounting
    equipment
    M081A97 metric mounting bolt with M6 thread -1
    (TO) temperature output
    temperature range 36 … 250 ° F 2 … 121 ° C
    Transcription factor 5.56 mV / ° F
    (zero point at 32 °F)
    10 mV / ° C
    electrical connection integrated armored cables
    Pin assigNment (green wire) ground
    (black wire) pin assigNment mass
    (white wire) Temperature output
    Connections (red wire) acceleration output
    (EX) with ATEX approval
    approved for explosive atmosphere eras ExIA IIC T4, AExia IIC, T4
    approval for use in potentially explosive atmospheres EEx nL IIC T4,-40 ° C ≤ Ta ≤ 121 ° C, II 3 G
    Approval for use in potentially explosive atmospheres EEx nL IIC T4,-40 ° C ≤ Ta ≤ 121 ° C, II 1 G
    approved for explosive atmosphere ren CL I, div I, groups A, B, C, D CL
    II, div I, groups E, F, G Cl
    III, div I
    approval for use in potentially explosive atmospheres CL I, div 2, groups A, B, C, D
    ExnL IIC T4, AExnA IIC T4
    PCB-(M)602D61

    Specific References

    Download

    602D61_drawing.PDF

    Technical drawing

    Download (47.54k)

    602D61_manual.PDF

    Operating instructions

    Download (897.99k)

    602D61_specs.PDF

    Technical data sheet

    Download (98.9k)