PCB-(M)602D11
| basic data | |||
| sensitivity (±10%) | 10.2 mV/(m/s²) | [6] | |
| measuring range | ±50 g | ±490 m / s² | |
| Frequency range (± 3 dB) | 30 … 480,000 cpm | 0.5 … 8,000 Hz | [2] |
| resonance frequency | 1,500 kcpm | 25,000 Hz | [1] |
| Wide band resolution | 350 µg | 3.434 µm / s ² | [1] |
| linearity | ≤1% | [3] | |
| Transverse acceleration sensitivity | ≤ 7% | ||
| conditions of use | |||
| Overload limit (shock) | 5,000 g pk | 49,050 m/s² pk | |
| temperature range | -65 … 250 ° F | -54 … 121 ° C | |
| Type of protection | IP68 | ||
| Technical characteristics | |||
| settling time (on bias voltage ± 1%) | ≤2.0 s | ||
| discharging charging time constant | ≥0.3 s | ||
| Power | 18 … 28 V DC | ||
| constant power supply | 2 … 20 mA | ||
| Output impedance | < 150 Ω | ||
| Bias voltage | 8 … 12 V DC | ||
| Spectral noise (10 Hz) | 8.0 µg / √Hz | 78.5 (µm / s ²) / √Hz | [1] |
| spectral noise (100 Hz) | 5 µg / √Hz | 49.1 (µm / s ²) / √Hz | [1] |
| Spectral noise (1,000 Hz) | 4 µg / √Hz | 39.2 (µm / s ²) / √Hz | [1] |
| electrical insulation (housing) | |||
| Physical properties | |||
| size - length | 3.70 in | 94 mm | |
| size - width | 0.74 at | 18.8 mm | |
| Size - height | 0,845 in | 21.5 mm | |
| dimensions (without cable) | 2.61 oz | 74.0 grams | |
| Mounting thread | 1/4"-28 | No metric equivalent | [4] |
| Assembly torque | 2 … 5 ft-lb | 2.7 … 6.8 Nm | |
| Sensor element | ceramic | ||
| geometry of the sensor element | shear principle | ||
| housing material | stainless steel | ||
| Sealing | hermetically sealed welded | ||
| electrical connection | potted integrated cable | ||
| Cable exit | side | ||
| cable length | 10 ft | 3.0 m | |
| cable type | polyurethane | [5] | |
| Notes | |||
| [1] | typically | ||
| [2] | the upper cut-off frequency tolerance: ±10% | ||
| [3] | zero-based balancing line, determined using the method of least squares | ||
| [4] | mounting with M6 screw possible | ||
| [5] | two-wire shielded cablewith twisted wire | ||
| [6] | conversion factor 1 g = 9.81 m/s² | ||
| [7] | details: see PCBs Declaration of conformance PS023 and < a href = ""... "/ produkte_skript/downloads/ce/ps060.pdf" "class ="blue"> PS060 | ||
| equipment | |||
| 081A97 | passage screw 1/4" 28 | -1 | |
| ICS-2 | single point calibration at 100 Hz (traceable to NIST) | -1 | |
| (M) metric mounting | |||
| equipment | |||
| M081A97 | metric mounting bolt with M6 thread | -1 | |
| (TO) temperature output | |||
| temperature range | 36 … 250 ° F | 2 … 121 ° C | |
| Transcription factor | 5.56 mV / ° F (zero point at 32 °F) | 10 mV / ° C | |
| electrical connection | potted integrated cable | ||
| Pin assigNment (green wire) | ground | ||
| (black wire) pin assigNment | mass | ||
| (white wire) | Temperature output | ||
| Connections (red wire) | acceleration output | ||
| (EX) with ATEX approval | |||
| approved for explosive atmosphere eras | ExIA IIC T4, AExia IIC, T4 | ||
| approval for use in potentially explosive atmospheres | EEx nL IIC T4,-40 ° C≤Ta≤121 ° C, II 3 G | ||
| Approval for use in potentially explosive atmospheres | EEx nL IIC T4,-40 ° C≤Ta≤121 ° C, II 1 G | ||
| approved for explosive atmosphere ren | CL I, div I, groups A, B, C, D CL II, div I, groups E, F, G Cl III, div I | ||
| approval for use in potentially explosive atmospheres | CL I, div 2, groups A, B, C, D ExnL IIC T4, AExnA IIC T4 |
PCB-(M)602D11
