PCB-(M)602D01
zoom_out_map

PCB-(M)602D01

  • Industrial ICP® vibration sensor,
  • With through hole,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.5 … 8,000 Hz,
  • One-point calibration at 100 Hz,
  • 2-pin female connector on the side
  •  

    basic data
    sensitivity (±10%) 10.2 mV/(m/s²) [5]
     
    measuring range ±50 g ±490 m / s²  
     
    Frequency range (± 3 dB) 30 … 480,000 cpm 0.5 … 8,000 Hz [2]
     
    resonance frequency 1,500 kcpm 25,000 Hz [1]
     
    Wide band resolution 350 µg 3.434 µm / s ² [1]
     
    linearity ≤1%   [3]
     
    Transverse acceleration sensitivity ≤ 7%    
    conditions of use
    Overload limit (shock) 5,000 g pk 49,050 m/s² pk  
     
    temperature range -65 … 250 ° F -54 … 121 ° C  
     
    Type of protection IP68    
    Technical characteristics
    settling time (on bias voltage ± 1%) ≤2.0 s    
     
    discharging charging time constant ≥0.3 s    
     
    Power 18 … 28 V DC    
     
    constant power supply 2 … 20 mA    
     
    Output impedance < 150 Ω    
     
    Bias voltage 8 … 12 V DC    
     
    Spectral noise (10 Hz) 8.0 µg / √Hz 78.5 (µm / s ²) / √Hz [1]
     
    spectral noise (100 Hz) 5 µg / √Hz 49.1 (µm / s ²) / √Hz [1]
     
    Spectral noise (1,000 Hz) 4 µg / √Hz 39.2 (µm / s ²) / √Hz [1]
     
    electrical insulation (housing)    
    Physical properties
    size - length 1.65 in 41.9 mm  
     
    size - width 0.74 at 18.8 mm  
     
    Size - height 0,845 in 21.5 mm  
     
    mass 2.61 oz 74.0 grams  
     
    Mounting thread 1/4"-28 No metric equivalent [4]
     
    Assembly torque 2 … 5 ft-lb 2.7 … 6.8 Nm  
     
    Sensor element Ceramic    
     
    Geometry of the sensor element shear principle    
     
    housing material stainless steel    
     
    Sealing Hermetically sealed welded    
     
    Electrical connection 2-pin connector (MIL-C-5015)    
     
    connection position side    
    notes
    [1] typically    
     
    [2] the upper cut-off frequency tolerance: ±10%    
     
    [3] zero-based balancing line, determined using the method of least squares    
     
    [4] mounting with M6 screw possible    
     
    [5] Conversion factor 1 g = 9.81 m/s²    
     
    [6] details: see PCBs Declaration of conformance PS023 and PS060    
    equipment
    081A97 passage screw 1/4 "28 -1  
    (M) metric mounting
    included" Accessories      
     
    M081A97 metric mounting bolt with M6 thread -1  
    (TO) temperature output
    temperature range 36 … 250 ° F 2 … 121 ° C  
     
    transcription factor 5.56 mV / ° F
    (zero point at 32 °F)
    10 mV / ° C  
     
    electric Connection 3-Pin    
     
    pin assigNment (PIN A) acceleration output    
     
    pin assigNment (PIN B) dimensions    
     
    Pin assigNment (PIN C) temperature output    
    (EX) with ATEX approval
    approval for use in potentially explosive atmospheres ExIA AExia IIC, IIC T4, T4    
     
    approval for use in potentially explosive atmospheres EEx nL IIC T4,-40 ° C≤Ta≤121 ° C, II 3 G    
     
    Approval for hazardousAtmospheres EEx nL IIC T4,-40 ° C≤Ta≤121 ° C, II 1 G    
     
    approval for use in potentially explosive atmospheres CL I, div I, groups A, B, C, D CL II, div I, groups E, F, G CL III, div I    
     
    Approval for use in potentially explosive atmospheres CL I, div 2, groups A, B, C, D ExnL IIC T4, AExnA IIC T4    
    PCB-(M)602D01

    Specific References

    Download

    602D01_drawing.PDF

    Technical drawing

    Download (85.35k)

    602D01_manual.PDF

    Operating instructions

    Download (912.59k)

    602D01_specs.PDF

    Technical data sheet

    Download (79.95k)